From: Igor Opaniuk <[email protected]> Remove legacy sdboot wrapper as distroboot can be used instead.
Signed-off-by: Igor Opaniuk <[email protected]> --- include/configs/colibri_imx7.h | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index ade4df5ad8..c2d98291b0 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -109,28 +109,6 @@ "ramdisk_addr_r=0x82100000\0" \ "scriptaddr=0x82500000\0" -#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define SD_BOOTDEV 0 -#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) -#define SD_BOOTDEV 1 -#endif - -#define SD_BOOTCMD \ - "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \ - "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ - "setenv bootargs ${defargs} ${sdargs} " \ - "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ - "run m4boot && " \ - "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \ - "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \ - "${soc}-colibri-${fdt_board}.dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "sdbootpart=1\0" \ - "sddev=" __stringify(SD_BOOTDEV) "\0" \ - "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ - "sdrootpart=2\0" - - #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ "nfsboot=run setup; " \ @@ -184,7 +162,6 @@ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ NFS_BOOTCMD \ - SD_BOOTCMD \ MODULE_EXTRA_ENV_SETTINGS \ "boot_file=zImage\0" \ "console=ttymxc0\0" \ -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
