Use prepared header instead of hardcoded values.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynqmp-clk-ccf.dtsi | 164 ++++++++++++++-----------------
arch/arm/dts/zynqmp.dtsi | 2 +-
drivers/clk/clk_zynqmp.c | 1 -
3 files changed, 73 insertions(+), 94 deletions(-)
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 247a35f9219d..bd0f8eb22c5f 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -7,29 +7,30 @@
* Michal Simek <michal.si...@xilinx.com>
*/
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
/ {
fclk0: fclk0 {
- status = "disabled";
+ status = "okay";
compatible = "xlnx,fclk";
- clocks = <&clkc 71>;
+ clocks = <&zynqmp_clk PL0_REF>;
};
fclk1: fclk1 {
- status = "disabled";
+ status = "okay";
compatible = "xlnx,fclk";
- clocks = <&clkc 72>;
+ clocks = <&zynqmp_clk PL1_REF>;
};
fclk2: fclk2 {
- status = "disabled";
+ status = "okay";
compatible = "xlnx,fclk";
- clocks = <&clkc 73>;
+ clocks = <&zynqmp_clk PL2_REF>;
};
fclk3: fclk3 {
- status = "disabled";
+ status = "okay";
compatible = "xlnx,fclk";
- clocks = <&clkc 74>;
+ clocks = <&zynqmp_clk PL3_REF>;
};
pss_ref_clk: pss_ref_clk {
@@ -67,35 +68,6 @@
clock-frequency = <27000000>;
};
- clkc: clkc {
- u-boot,dm-pre-reloc;
- #clock-cells = <1>;
- compatible = "xlnx,zynqmp-clkc";
- clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
<&aux_ref_clk>, <>_crx_ref_clk>;
- clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
"aux_ref_clk", "gt_crx_ref_clk";
- clock-output-names = "iopll", "rpll", "apll", "dpll",
- "vpll", "iopll_to_fpd", "rpll_to_fpd",
- "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd",
- "acpu", "acpu_half", "dbf_fpd", "dbf_lpd",
- "dbg_trace", "dbg_tstmp", "dp_video_ref",
- "dp_audio_ref", "dp_stc_ref", "gdma_ref",
- "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref",
- "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref",
- "topsw_main", "topsw_lsbus", "gtgref0_ref",
- "lpd_switch", "lpd_lsbus", "usb0_bus_ref",
- "usb1_bus_ref", "usb3_dual_ref", "usb0",
- "usb1", "cpu_r5", "cpu_r5_core", "csu_spb",
- "csu_pll", "pcap", "iou_switch", "gem_tsu_ref",
- "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref",
- "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx",
- "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref",
- "uart0_ref", "uart1_ref", "spi0_ref",
- "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref",
- "can0_ref", "can1_ref", "can0", "can1",
- "dll_ref", "adma_ref", "timestamp_ref",
- "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt";
- };
-
dp_aclk: dp_aclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -104,202 +76,210 @@
};
};
+&zynqmp_firmware {
+ zynqmp_clk: clock-controller {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+ <&aux_ref_clk>, <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+ "aux_ref_clk", "gt_crx_ref_clk";
+ };
+};
+
&can0 {
- clocks = <&clkc 63>, <&clkc 31>;
+ clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&can1 {
- clocks = <&clkc 64>, <&clkc 31>;
+ clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&cpu0 {
- clocks = <&clkc 10>;
+ clocks = <&zynqmp_clk ACPU>;
};
&fpd_dma_chan1 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan2 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan3 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan4 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan5 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan6 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan7 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&fpd_dma_chan8 {
- clocks = <&clkc 19>, <&clkc 31>;
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&gpu {
- clocks = <&clkc 24>, <&clkc 25>, <&clkc 26>;
+ clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>, <&zynqmp_clk
GPU_PP1_REF>;
};
&lpd_dma_chan1 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan2 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan3 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan4 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan5 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan6 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan7 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&lpd_dma_chan8 {
- clocks = <&clkc 68>, <&clkc 31>;
+ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&nand0 {
- clocks = <&clkc 60>, <&clkc 31>;
+ clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&gem0 {
- clocks = <&clkc 31>, <&clkc 49>, <&clkc 45>, <&clkc 49>, <&clkc 44>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk
GEM0_TX>,
+ <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem1 {
- clocks = <&clkc 31>, <&clkc 50>, <&clkc 46>, <&clkc 50>, <&clkc 44>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk
GEM1_TX>,
+ <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem2 {
- clocks = <&clkc 31>, <&clkc 51>, <&clkc 47>, <&clkc 51>, <&clkc 44>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk
GEM2_TX>,
+ <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem3 {
- clocks = <&clkc 31>, <&clkc 52>, <&clkc 48>, <&clkc 52>, <&clkc 44>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk
GEM3_TX>,
+ <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gpio {
- clocks = <&clkc 31>;
+ clocks = <&zynqmp_clk LPD_LSBUS>;
};
&i2c0 {
- clocks = <&clkc 61>;
+ clocks = <&zynqmp_clk I2C0_REF>;
};
&i2c1 {
- clocks = <&clkc 62>;
+ clocks = <&zynqmp_clk I2C1_REF>;
};
&pcie {
- clocks = <&clkc 23>;
+ clocks = <&zynqmp_clk PCIE_REF>;
};
&qspi {
- clocks = <&clkc 53>, <&clkc 31>;
+ clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&sata {
- clocks = <&clkc 22>;
+ clocks = <&zynqmp_clk SATA_REF>;
};
&sdhci0 {
- clocks = <&clkc 54>, <&clkc 31>;
+ clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&sdhci1 {
- clocks = <&clkc 55>, <&clkc 31>;
+ clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&spi0 {
- clocks = <&clkc 58>, <&clkc 31>;
+ clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&spi1 {
- clocks = <&clkc 59>, <&clkc 31>;
+ clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&ttc0 {
- clocks = <&clkc 31>;
+ clocks = <&zynqmp_clk LPD_LSBUS>;
};
&ttc1 {
- clocks = <&clkc 31>;
+ clocks = <&zynqmp_clk LPD_LSBUS>;
};
&ttc2 {
- clocks = <&clkc 31>;
+ clocks = <&zynqmp_clk LPD_LSBUS>;
};
&ttc3 {
- clocks = <&clkc 31>;
+ clocks = <&zynqmp_clk LPD_LSBUS>;
};
&uart0 {
- clocks = <&clkc 56>, <&clkc 31>;
+ clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&uart1 {
- clocks = <&clkc 57>, <&clkc 31>;
+ clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
};
&usb0 {
- clocks = <&clkc 32>, <&clkc 34>;
+ clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
};
&usb1 {
- clocks = <&clkc 33>, <&clkc 34>;
+ clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
};
&watchdog0 {
- clocks = <&clkc 75>;
+ clocks = <&zynqmp_clk WDT>;
};
&xilinx_ams {
- clocks = <&clkc 70>;
-};
-
-&xilinx_drm {
- clocks = <&clkc 16>;
-};
-
-&xlnx_dp {
- clocks = <&dp_aclk>, <&clkc 17>;
+ clocks = <&zynqmp_clk AMS_REF>;
};
&xlnx_dpdma {
- clocks = <&clkc 20>;
+ clocks = <&zynqmp_clk DPDMA_REF>;
};
&xlnx_dp_snd_codec0 {
- clocks = <&clkc 17>;
+ clocks = <&zynqmp_clk DP_AUDIO_REF>;
};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 337922f8a966..854608c9382b 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -140,7 +140,7 @@
};
firmware {
- zynqmp-firmware {
+ zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
#power-domain-cells = <0x1>;
diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
index 167f3f75a19c..72fc39fa47a8 100644
--- a/drivers/clk/clk_zynqmp.c
+++ b/drivers/clk/clk_zynqmp.c
@@ -702,7 +702,6 @@ static struct clk_ops zynqmp_clk_ops = {
static const struct udevice_id zynqmp_clk_ids[] = {
{ .compatible = "xlnx,zynqmp-clk" },
- { .compatible = "xlnx,zynqmp-clkc" },
{ }
};
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
