> Subject: [PATCH] imx: require CCM driver only on i.MX8MM > > Since there is no clock driver like that for i.MX8MQ, we cannot require it on > that platform, so make sure it is only built for i.MX8MM. This makes > i.MX8MQ platforms work again.
I would add this: diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index c46031dd12..3e73ca3cca 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -236,12 +236,14 @@ int arch_cpu_init_dm(void) struct udevice *dev; int ret; - ret = uclass_get_device_by_name(UCLASS_CLK, - "clock-controller@30380000", - &dev); - if (ret < 0) { - printf("Failed to find clock node. Check device tree\n"); - return ret; + if (CONFIG_IS_ENABLED(CLK)) { + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", + &dev); + if (ret < 0) { + printf("Failed to find clock node. Check device tree\n"); + return ret; + } } return 0; Thanks, Peng. > > Signed-off-by: Patrick Wildt <patr...@blueri.se> > --- > arch/arm/mach-imx/imx8m/soc.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/mach-imx/imx8m/soc.c > b/arch/arm/mach-imx/imx8m/soc.c index aeca82cdbf..11ca8c86b3 100644 > --- a/arch/arm/mach-imx/imx8m/soc.c > +++ b/arch/arm/mach-imx/imx8m/soc.c > @@ -229,6 +229,7 @@ static void imx_set_wdog_powerdown(bool enable) > writew(enable, &wdog3->wmcr); > } > > +#ifdef CONFIG_ARCH_IMX8MM > int arch_cpu_init_dm(void) > { > struct udevice *dev; > @@ -244,6 +245,7 @@ int arch_cpu_init_dm(void) > > return 0; > } > +#endif > > int arch_cpu_init(void) > { > -- > 2.23.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot