Some boards don't populate clk/reset entries as these are are optional
as per binding documentation. Therefore, don't fail driver probe if
clk/reset entries are absent in DT.
This fixes fastboot failures seen due to enabling of CONFIG_CLK on AM57xx
Fixes: e8e683d33b0c ("board: ti: am57xx-idk: Configure the CDCE913 clock
synthesizer")
Reported-by: Sam Protsenko <semen.protse...@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
drivers/usb/dwc3/dwc3-generic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 406bf0b3628b..d76cd7a4c5ca 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -258,7 +258,7 @@ static int dwc3_glue_reset_init(struct udevice *dev,
int ret;
ret = reset_get_bulk(dev, &glue->resets);
- if (ret == -ENOTSUPP)
+ if (ret == -ENOTSUPP || ret == -ENOENT)
return 0;
else if (ret)
return ret;
@@ -278,7 +278,7 @@ static int dwc3_glue_clk_init(struct udevice *dev,
int ret;
ret = clk_get_bulk(dev, &glue->clks);
- if (ret == -ENOSYS)
+ if (ret == -ENOSYS || ret == -ENOENT)
return 0;
if (ret)
return ret;
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
