Hi Fabio,
On 30/10/19 15:43, Fabio Estevam wrote:
Hi Walter,
On Wed, Oct 30, 2019 at 11:22 AM Walter Lozano
<[email protected]> wrote:
Thanks for your comments. My intention was to initially send the device tree
patches and in a different patchset update the configuration, as it requires to
run different tests (i.e. boot from SATA). Also I felt that this patch has
meaning by itself, as it could be useful for people willing to test DM on this
board.
It is preferred that you resend the dts pieces only when the cubox
board is really converted to DM, otherwise you are only adding "dead
code".
Thanks for the suggestion. I will wait for some SATA tests before re
sending these patches.
Also the imx6dl-cubox-i-u-boot.dtb does not need to be explicitly
added in the Makefile.
It gets built automatically by the core U-Boot Makefile logic.
Thanks for the information. I was confused by entries like
"r8a7790-lager-u-boot.dtb" in the Makefile but you are right. I will
take this into account for v2.
Thanks
Regards
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
