Use generic phy to initialize the PHY associated to the DWC2 device and available in the device tree.
This patch don't added dependency because when CONFIG_PHY is not activated, the generic PHY function are stubbed. Signed-off-by: Patrick Delaunay <[email protected]> --- Changes in v2: - update dev_err - update commit message - change dev_err to dev_dbg for PHY function call - treat dwc2_shutdown_phy error drivers/usb/host/dwc2.c | 66 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 350d820a6e..cb2b381eb6 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -7,6 +7,7 @@ #include <common.h> #include <dm.h> #include <errno.h> +#include <generic-phy.h> #include <usb.h> #include <malloc.h> #include <memalign.h> @@ -35,6 +36,7 @@ struct dwc2_priv { #ifdef CONFIG_DM_REGULATOR struct udevice *vbus_supply; #endif + struct phy phy; #else uint8_t *aligned_buffer; uint8_t *status_buffer; @@ -1320,13 +1322,71 @@ static int dwc2_usb_ofdata_to_platdata(struct udevice *dev) return 0; } +static int dwc2_setup_phy(struct udevice *dev) +{ + struct dwc2_priv *priv = dev_get_priv(dev); + int ret; + + ret = generic_phy_get_by_index(dev, 0, &priv->phy); + if (ret) { + if (ret != -ENOENT) { + dev_err(dev, "Failed to get USB PHY: %d.\n", ret); + return ret; + } + return 0; + } + + ret = generic_phy_init(&priv->phy); + if (ret) { + dev_dbg(dev, "Failed to init USB PHY: %d.\n", ret); + return ret; + } + + ret = generic_phy_power_on(&priv->phy); + if (ret) { + dev_dbg(dev, "Failed to power on USB PHY: %d.\n", ret); + generic_phy_exit(&priv->phy); + return ret; + } + + return 0; +} + +static int dwc2_shutdown_phy(struct udevice *dev) +{ + struct dwc2_priv *priv = dev_get_priv(dev); + int ret; + + if (!generic_phy_valid(&priv->phy)) + return 0; + + ret = generic_phy_power_off(&priv->phy); + if (ret) { + dev_dbg(dev, "Failed to power off USB PHY: %d.\n", ret); + return ret; + } + + ret = generic_phy_exit(&priv->phy); + if (ret) { + dev_dbg(dev, "Failed to power off USB PHY: %d.\n", ret); + return ret; + } + + return 0; +} + static int dwc2_usb_probe(struct udevice *dev) { struct dwc2_priv *priv = dev_get_priv(dev); struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); + int ret; bus_priv->desc_before_addr = true; + ret = dwc2_setup_phy(dev); + if (ret) + return ret; + return dwc2_init_common(dev, priv); } @@ -1339,6 +1399,12 @@ static int dwc2_usb_remove(struct udevice *dev) if (ret) return ret; + ret = dwc2_shutdown_phy(dev); + if (ret) { + dev_dbg(dev, "Failed to shutdown USB PHY: %d.\n", ret); + return ret; + } + dwc2_uninit_common(priv->regs); reset_release_bulk(&priv->resets); -- 2.17.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
