These DT files are copied from kernel v5.3 with no changes.

This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and
Hummingboard2 Gate/Edge.

Signed-off-by: Baruch Siach <bar...@tkos.co.il>
---
v2: Splits into two commits to comply with list size limits
---
 arch/arm/dts/Makefile                         |  14 +
 arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts  |  52 ++
 arch/arm/dts/imx6dl-cubox-i-som-v15.dts       |  51 ++
 .../dts/imx6dl-hummingboard-emmc-som-v15.dts  |  53 ++
 arch/arm/dts/imx6dl-hummingboard-som-v15.dts  |  52 ++
 ...6dl-hummingboard2-emmc-som-v15-u-boot.dtsi |   1 +
 .../dts/imx6dl-hummingboard2-emmc-som-v15.dts |  55 ++
 arch/arm/dts/imx6dl-hummingboard2-som-v15.dts |  54 ++
 arch/arm/dts/imx6dl-hummingboard2.dts         |  53 ++
 arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts   |  60 ++
 arch/arm/dts/imx6q-cubox-i-som-v15.dts        |  59 ++
 .../dts/imx6q-hummingboard-emmc-som-v15.dts   |  61 ++
 arch/arm/dts/imx6q-hummingboard-som-v15.dts   |  60 ++
 ...x6q-hummingboard2-emmc-som-v15-u-boot.dtsi |   1 +
 .../dts/imx6q-hummingboard2-emmc-som-v15.dts  |  63 ++
 arch/arm/dts/imx6q-hummingboard2-som-v15.dts  |  62 ++
 arch/arm/dts/imx6q-hummingboard2.dts          |  61 ++
 ...qdl-hummingboard2-emmc-som-v15-u-boot.dtsi |  36 ++
 arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi  |  72 +++
 arch/arm/dts/imx6qdl-hummingboard2.dtsi       | 577 ++++++++++++++++++
 arch/arm/dts/imx6qdl-sr-som-emmc.dtsi         |  70 +++
 arch/arm/dts/imx6qdl-sr-som-ti.dtsi           | 170 ++++++
 22 files changed, 1737 insertions(+)
 create mode 100644 arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-cubox-i-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-hummingboard-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-hummingboard2-som-v15.dts
 create mode 100644 arch/arm/dts/imx6dl-hummingboard2.dts
 create mode 100644 arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-cubox-i-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-hummingboard-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-hummingboard2-som-v15.dts
 create mode 100644 arch/arm/dts/imx6q-hummingboard2.dts
 create mode 100644 arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-hummingboard2.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sr-som-emmc.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sr-som-ti.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a2ed92b77f15..866ee1605722 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -561,8 +561,15 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
 ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
 dtb-y += \
        imx6dl-cubox-i.dtb \
+       imx6dl-cubox-i-emmc-som-v15.dtb \
+       imx6dl-cubox-i-som-v15.dtb \
        imx6dl-dhcom-pdk2.dtb \
+       imx6dl-hummingboard2.dtb \
+       imx6dl-hummingboard2-emmc-som-v15.dtb \
+       imx6dl-hummingboard2-som-v15.dtb \
        imx6dl-hummingboard.dtb \
+       imx6dl-hummingboard-emmc-som-v15.dtb \
+       imx6dl-hummingboard-som-v15.dtb \
        imx6dl-icore.dtb \
        imx6dl-icore-mipi.dtb \
        imx6dl-icore-rqs.dtb \
@@ -580,9 +587,16 @@ dtb-y += \
        imx6-apalis.dtb \
        imx6q-cm-fx6.dtb \
        imx6q-cubox-i.dtb \
+       imx6q-cubox-i-emmc-som-v15.dtb \
+       imx6q-cubox-i-som-v15.dtb \
        imx6q-dhcom-pdk2.dtb \
        imx6q-display5.dtb \
+       imx6q-hummingboard2.dtb \
+       imx6q-hummingboard2-emmc-som-v15.dtb \
+       imx6q-hummingboard2-som-v15.dtb \
        imx6q-hummingboard.dtb \
+       imx6q-hummingboard-emmc-som-v15.dtb \
+       imx6q-hummingboard-som-v15.dtb \
        imx6q-icore.dtb \
        imx6q-icore-mipi.dtb \
        imx6q-icore-rqs.dtb \
diff --git a/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts 
b/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..2b2fc360b865
--- /dev/null
+++ b/arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+       model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+       compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-cubox-i-som-v15.dts 
b/arch/arm/dts/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..e09c565d1d1f
--- /dev/null
+++ b/arch/arm/dts/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+       model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+       compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts 
b/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..a63f742f20d9
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rab...@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+       compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-hummingboard-som-v15.dts 
b/arch/arm/dts/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..66a06cf3cdf3
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rab...@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+       compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi 
b/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000000..89fbec4d06fe
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1 @@
+#include "imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts 
b/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000000..80313c13bcdb
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,55 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
+       compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts 
b/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts
new file mode 100644
index 000000000000..e61ef1156f8b
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard2-som-v15.dts
@@ -0,0 +1,54 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
+       compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-hummingboard2.dts 
b/arch/arm/dts/imx6dl-hummingboard2.dts
new file mode 100644
index 000000000000..b12cd87f3f94
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Solo/DualLite";
+       compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts 
b/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..3e59ebbb3608
--- /dev/null
+++ b/arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+       model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+       compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1104>;
+       fsl,transmit-boost-mdB = <0>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/dts/imx6q-cubox-i-som-v15.dts 
b/arch/arm/dts/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..dab70d1230a2
--- /dev/null
+++ b/arch/arm/dts/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+       model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+       compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1104>;
+       fsl,transmit-boost-mdB = <0>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts 
b/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..c51b4e4fd71e
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rab...@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+       compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1025>;
+       fsl,transmit-boost-mdB = <3330>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/dts/imx6q-hummingboard-som-v15.dts 
b/arch/arm/dts/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..e4132d62ffa2
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rab...@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+       compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1025>;
+       fsl,transmit-boost-mdB = <3330>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi 
b/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000000..89fbec4d06fe
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1 @@
+#include "imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts 
b/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000000..1998ebfa0fe0
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
+       compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1104>;
+       fsl,transmit-boost-mdB = <0>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/dts/imx6q-hummingboard2-som-v15.dts 
b/arch/arm/dts/imx6q-hummingboard2-som-v15.dts
new file mode 100644
index 000000000000..d3ad7329cd6d
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard2-som-v15.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
+       compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1104>;
+       fsl,transmit-boost-mdB = <0>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/dts/imx6q-hummingboard2.dts 
b/arch/arm/dts/imx6q-hummingboard2.dts
new file mode 100644
index 000000000000..5249f53dcdbc
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard2.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+       model = "SolidRun HummingBoard2 Dual/Quad";
+       compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+       fsl,transmit-level-mV = <1104>;
+       fsl,transmit-boost-mdB = <0>;
+       fsl,transmit-atten-16ths = <9>;
+       fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi 
b/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
new file mode 100644
index 000000000000..d302b2e27585
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+       board-detect {
+               compatible = "solidrun,hummingboard-detect";
+               detect-gpios = <
+                       &gpio2 8 0
+                       &gpio3 4 0
+                       &gpio4 9 0
+                       &gpio6 0 0
+                       &gpio6 4 0
+               >;
+       };
+};
+
+&gpio2 {
+       u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+       u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+       u-boot,dm-pre-reloc;
+};
+
+&gpio6 {
+       u-boot,dm-pre-reloc;
+};
+
+&usdhc1 {
+       status = "disabled";
+};
diff --git a/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi 
b/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi
new file mode 100644
index 000000000000..f400405381a7
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-hummingboard2-emmc.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+       hummingboard2 {
+               pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+                               MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+                               MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+                               MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+                               MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+                               MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+                       >;
+               };
+       };
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+       vmmc-supply = <&v_3v2>;
+       vqmmc-supply = <&v_3v2>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
diff --git a/arch/arm/dts/imx6qdl-hummingboard2.dtsi 
b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000000..e4231331f04e
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rab...@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+       /* Will be filled by the bootloader */
+       memory@10000000 {
+               device_type = "memory";
+               reg = <0x10000000 0>;
+       };
+
+       chosen {
+               stdout-path = &uart1;
+       };
+
+       ir_recv: ir-receiver {
+               compatible = "gpio-ir-receiver";
+               gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+               linux,rc-map-name = "rc-rc6-mce";
+       };
+
+       v_3v2: regulator-v-3v2 {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-max-microvolt = <3300000>;
+               regulator-min-microvolt = <3300000>;
+               regulator-name = "v_3v2";
+       };
+
+       v_5v0: regulator-v-5v0 {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "v_5v0";
+       };
+
+       vcc_1p8: regulator-vcc-1p8 {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-max-microvolt = <1800000>;
+               regulator-min-microvolt = <1800000>;
+               regulator-name = "vcc_1p8";
+               vin-supply = <&v_3v2>;
+       };
+
+       v_sd: regulator-v-sd {
+               compatible = "regulator-fixed";
+               gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+               regulator-boot-on;
+               regulator-max-microvolt = <3300000>;
+               regulator-min-microvolt = <3300000>;
+               regulator-name = "v_sd";
+               startup-delay-us = <1000>;
+               vin-supply = <&v_3v2>;
+       };
+
+       v_usb1: regulator-v-usb1 {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+               regulator-always-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "v_usb1";
+               vin-supply = <&v_5v0>;
+       };
+
+       v_usb2: regulator-v-usb2 {
+               /* USB hub port 1 */
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+               regulator-always-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "v_usb2";
+               vin-supply = <&v_5v0>;
+       };
+
+       v_usb3: regulator-v-usb3 {
+               /* USB hub port 3 */
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+               regulator-always-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "v_usb3";
+               vin-supply = <&v_5v0>;
+       };
+
+       v_usb4: regulator-v-usb4 {
+               /* USB hub port 4 */
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+               regulator-always-on;
+               regulator-max-microvolt = <5000000>;
+               regulator-min-microvolt = <5000000>;
+               regulator-name = "v_usb4";
+               vin-supply = <&v_5v0>;
+       };
+
+       audio: sound-sgtl5000 {
+               compatible = "simple-audio-card";
+               simple-audio-card,name = "On-board Codec";
+               simple-audio-card,format = "i2s";
+               simple-audio-card,bitclock-master = <&sound_codec>;
+               simple-audio-card,frame-master = <&sound_codec>;
+               simple-audio-card,widgets =
+                       "Microphone", "Mic Jack",
+                       "Headphone", "Headphone Jack";
+               simple-audio-card,routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+
+               sound_cpu: simple-audio-card,cpu {
+                       sound-dai = <&ssi1>;
+               };
+
+               sound_codec: simple-audio-card,codec {
+                       sound-dai = <&sgtl5000>;
+               };
+       };
+};
+
+&audmux {
+       status = "okay";
+
+       ssi1 {
+               fsl,audmux-port = <0>;
+               fsl,port-config = <
+                       (IMX_AUDMUX_V2_PTCR_SYN |
+                        IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+                        IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+                        IMX_AUDMUX_V2_PTCR_TFSDIR |
+                        IMX_AUDMUX_V2_PTCR_TCLKDIR)
+                        IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+               >;
+       };
+
+       pins5 {
+               fsl,audmux-port = <4>;
+               fsl,port-config = <
+                       IMX_AUDMUX_V2_PTCR_SYN
+                       IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+               >;
+       };
+};
+
+&ecspi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+       cs-gpios = <&gpio2 26 0>;
+       status = "okay";
+};
+
+&hdmi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+       ddc-i2c-bus = <&i2c2>;
+       status = "okay";
+};
+
+&i2c1 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+       status = "okay";
+
+       pcf8523: rtc@68 {
+               compatible = "nxp,pcf8523";
+               reg = <0x68>;
+       };
+
+       sgtl5000: codec@a {
+               clocks = <&clks IMX6QDL_CLK_CKO>;
+               compatible = "fsl,sgtl5000";
+               #sound-dai-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+               reg = <0x0a>;
+               VDDA-supply = <&v_3v2>;
+               VDDD-supply = <&vcc_1p8>;
+               VDDIO-supply = <&v_3v2>;
+       };
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+       status = "okay";
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       hummingboard2 {
+               pinctrl_hog: hoggrp {
+               fsl,pins = <
+                               /*
+                                * 36 pin headers GPIO description. The pins
+                                * numbering as following -
+                                *
+                                *      3.2v    5v      74      75
+                                *      73      72      71      70
+                                *      69      68      67      66
+                                *
+                                *      77      78      79      76
+                                *      65      64      61      60
+                                *      53      52      51      50
+                                *      49      48      166     132
+                                *      95      94      90      91
+                                *      GND     54      24      204
+                                *
+                                * The GPIO numbers can be extracted using
+                                * signal name from below.
+                                * Example -
+                                * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+                                * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+                                *
+                                * i.e. The mapping of GPIO(X,Y) to Linux gpio
+                                * number is : gpio number = (X-1) * 32 + Y
+                                */
+                               /* DI1_PIN15 */
+                               MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+                               /* DI1_PIN02 */
+                               MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+                               /* DISP1_DATA00 */
+                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+                               /* DISP1_DATA01 */
+                               MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+                               /* DISP1_DATA02 */
+                               MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+                               /* DISP1_DATA03 */
+                               MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+                               /* DISP1_DATA04 */
+                               MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+                               /* DISP1_DATA05 */
+                               MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+                               /* DISP1_DATA06 */
+                               MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+                               /* DISP1_DATA07 */
+                               MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+                               /* DI1_D0_CS */
+                               MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+                               /* DI1_D1_CS */
+                               MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+                               /* DI1_PIN01 */
+                               MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+                               /* DI1_PIN03 */
+                               MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+                               /* DISP1_DATA08 */
+                               MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+                               /* DISP1_DATA09 */
+                               MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+                               /* DISP1_DATA10 */
+                               MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+                               /* DISP1_DATA11 */
+                               MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+                               /* DISP1_DATA12 */
+                               MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+                               /* DISP1_DATA13 */
+                               MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+                               /* DISP1_DATA14 */
+                               MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+                               /* DISP1_DATA15 */
+                               MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+                               /* DISP1_DATA16 */
+                               MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+                               /* DISP1_DATA17 */
+                               MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+                               /* DISP1_DATA18 */
+                               MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+                               /* DISP1_DATA19 */
+                               MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+                               /* DISP1_DATA20 */
+                               MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+                               /* DISP1_DATA21 */
+                               MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+                               /* DISP1_DATA22 */
+                               MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+                               /* DISP1_DATA23 */
+                               MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+                               /* DI1_DISP_CLK */
+                               MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+                               /* SPDIF_IN */
+                               MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+                               /* SPDIF_OUT */
+                               MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+                               /* MikroBUS GPIO pin number 10 */
+                               MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+                               MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+                               MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+                               MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x000b1 /* CS */
+                       >;
+               };
+
+               pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+                       >;
+               };
+
+               pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+                       >;
+               };
+
+               pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+                               MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+                               MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+                               MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+                               MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+                               MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+                       >;
+               };
+
+               pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_pwm1: pwm1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_pwm3: pwm3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+                       >;
+               };
+
+               pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+                       fsl,pins = <
+                               MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+                               MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+                               MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+                               MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+                               MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+                       >;
+               };
+
+               pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+                       fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+               };
+
+               pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+                       fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+               };
+
+               pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+                       fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+               };
+
+               pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+                       /*
+                        * We want it pulled down for a fixed host connection.
+                        */
+                       fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+               };
+
+               pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+                       fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+               };
+
+               pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+                               MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+                       >;
+               };
+
+               pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+                               MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+                               MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+                               MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+                               MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+                               MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+                       >;
+               };
+
+               pinctrl_hummingboard2_usdhc2_100mhz: 
hummingboard2-usdhc2-100mhz {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+                               MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+                               MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+                               MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+                               MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+                               MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+                       >;
+               };
+
+               pinctrl_hummingboard2_usdhc2_200mhz: 
hummingboard2-usdhc2-200mhz {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+                               MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+                               MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+                               MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+                               MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+                               MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+                       >;
+               };
+
+               pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+                       fsl,pins = <
+                               MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+                       >;
+               };
+
+               pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D25__UART3_TX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D24__UART3_RX_DATA       
0x40013000
+                       >;
+               };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+       reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&pwm1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+       status = "okay";
+};
+
+&pwm3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+       status = "okay";
+};
+
+&ssi1 {
+       status = "okay";
+};
+
+&usbh1 {
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg {
+       disable-over-current;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+       vbus-supply = <&v_usb1>;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <
+               &pinctrl_hummingboard2_usdhc2_aux
+               &pinctrl_hummingboard2_usdhc2
+       >;
+       pinctrl-1 = <
+               &pinctrl_hummingboard2_usdhc2_aux
+               &pinctrl_hummingboard2_usdhc2_100mhz
+       >;
+       pinctrl-2 = <
+               &pinctrl_hummingboard2_usdhc2_aux
+               &pinctrl_hummingboard2_usdhc2_200mhz
+       >;
+       vmmc-supply = <&v_sd>;
+       cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+       status = "okay";
+};
+
+&vcc_3v3 {
+       vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi 
b/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 000000000000..5f3b8baab20f
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+       microsom {
+               pinctrl_microsom_usdhc3: microsom-usdhc3 {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+                               MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+                               MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+                               MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+                               MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+                               MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+                       >;
+               };
+       };
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+       bus-width = <8>;
+       non-removable;
+       vmmc-supply = <&vcc_3v3>;
+       status = "okay";
+};
diff --git a/arch/arm/dts/imx6qdl-sr-som-ti.dtsi 
b/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 000000000000..44a97ba93a95
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       nvcc_sd1: regulator-nvcc-sd1 {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-name = "nvcc_sd1";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc_3v3>;
+       };
+
+       clk_ti_wifi: ti-wifi-clock {
+               /* This is a hack around the kernel - using "fixed clock"
+                * results in the "pinctrl" properties being ignored, and
+                * the clock not being output.  Instead, use a gated clock
+                * and the unrouted WL_XTAL_PU gpio.
+                */
+               compatible = "gpio-gate-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+               enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+       };
+
+       pwrseq_ti_wifi: ti-wifi-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+               reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+               post-power-on-delay-ms = <200>;
+               clocks = <&clk_ti_wifi>;
+               clock-names = "ext_clock";
+       };
+};
+
+&iomuxc {
+       microsom {
+               pinctrl_microsom_ti_bt: microsom-ti-bt {
+                       fsl,pins = <
+                               /* BT_EN_SOC */
+                               MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00       
0x40013070
+                       >;
+               };
+
+               pinctrl_microsom_ti_clk: microsom-ti-clk {
+                       fsl,pins = <
+                               /* EXT_32K */
+                               MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K  0x1b0b0
+                               /* WL_XTAL_PU (unrouted) */
+                               MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+                       >;
+               };
+
+               pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+                       fsl,pins = <
+                               /* WLAN_EN_SOC */
+                               MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        
0x40013070
+                       >;
+               };
+
+               pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+                       fsl,pins = <
+                               /* WLAN_IRQ */
+                               MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04       
0x40013070
+                       >;
+               };
+
+               pinctrl_microsom_uart4: microsom-uart4 {
+                       fsl,pins = <
+                               MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+                               MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+                               MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+                               MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+                       >;
+               };
+
+               pinctrl_microsom_usdhc1: microsom-usdhc1 {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+                               MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+                               MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+                               MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+                               MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+                               MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+                       >;
+               };
+       };
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_microsom_uart4>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "ti,wl1837-st";
+               clocks = <&clk_ti_wifi>;
+               clock-names = "ext_clock";
+               enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+       };
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+       bus-width = <4>;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&pwrseq_ti_wifi>;
+       non-removable;
+       vmmc-supply = <&vcc_3v3>;
+       /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       wlcore@2 {
+               compatible = "ti,wl1837";
+               reg = <2>;
+               interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+       };
+};
-- 
2.24.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to