On 2019/11/10 上午3:09, Michael Trimarchi wrote:
Support tinker-s board. The board is equivalent of tinker board
except of emmc.
TODO:
- support of usb current burst when the board is powered from pc
Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
Changes V1->V2:
emmc: Add boot device
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 ++++++++
arch/arm/dts/rk3288-tinker-s.dts | 40 ++++++++++
configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++++++
include/configs/tinker_rk3288.h | 1 +
5 files changed, 175 insertions(+)
create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3288-tinker-s.dts
create mode 100644 configs/tinker-s-rk3288_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 89ab8001ce..7e9d6809ea 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-popmetal.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
new file mode 100644
index 0000000000..a177fca73a
--- /dev/null
+++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Amarula Solutions SRO
+ */
+
+#include "rk3288-u-boot.dtsi"
+#include "rk3288-tinker-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = \
+ "same-as-spl", &sdmmc, &emmc;
+ };
+};
+
+&emmc {
+ u-boot,dm-spl;
+};
+
+&emmc_clk {
+ u-boot,dm-spl;
+};
+
+&emmc_cmd {
+ u-boot,dm-spl;
+};
+
+&emmc_pwr {
+ u-boot,dm-spl;
+};
+
+&emmc_bus8 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts
new file mode 100644
index 0000000000..5884e280d2
--- /dev/null
+++ b/arch/arm/dts/rk3288-tinker-s.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
+&dmc {
+ rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+ 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+ 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+ 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+ 0x8 0x1f4>;
+ rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+ 0x0 0xc3 0x6 0x2>;
+ rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ max-frequency = <150000000>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
diff --git a/configs/tinker-s-rk3288_defconfig
b/configs/tinker-s-rk3288_defconfig
new file mode 100644
index 0000000000..c851a93f31
--- /dev/null
+++ b/configs/tinker-s-rk3288_defconfig
@@ -0,0 +1,99 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_TARGET_TINKER_RK3288=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_SIZE_LIMIT=307200
+CONFIG_SPL_STACK_R_ADDR=0x800000
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_SILENT_CONSOLE=y
+CONFIG_CONSOLE_MUX=y
+CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_CONSOLE_SCROLL_LINES=10
diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h
index 5adae68c91..f8a55a2cec 100644
--- a/include/configs/tinker_rk3288.h
+++ b/include/configs/tinker_rk3288.h
@@ -12,6 +12,7 @@
#undef BOOT_TARGET_DEVICES
#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(USB, usb, 0) \
func(PXE, pxe, na) \
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
