On Mon, Nov 11, 2019 at 5:23 AM Thomas Hebb <tommyh...@gmail.com> wrote: > > Signed-off-by: Thomas Hebb <tommyh...@gmail.com> > --- > Makefile | 2 +- > README | 4 ++-- > arch/arm/cpu/armv8/sec_firmware.c | 2 +- > arch/arm/mach-rockchip/Kconfig | 2 +- > arch/arm/mach-rockchip/bootrom.c | 4 ++-- > arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- > arch/arm/mach-rockchip/spl-boot-order.c | 2 +- > board/rockchip/evb_rk3399/README | 2 +- > common/spl/Kconfig | 4 ++-- > doc/README.SPL | 2 +- > doc/README.TPL | 2 +- > doc/uImage.FIT/source_file_format.txt | 2 +- > tools/binman/README | 2 +- > tools/binman/README.entries | 4 ++-- > 14 files changed, 20 insertions(+), 20 deletions(-) > > diff --git a/Makefile b/Makefile > index 5c8c4c971f..3c4082a3db 100644 > --- a/Makefile > +++ b/Makefile > @@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE > # make sure no implicit rule kicks in > $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; > > -# Handle descending into subdirectories listed in $(vmlinux-dirs) > +# Handle descending into ubdirectories listed in $(u-boot-dirs)
"ubdirectories" should stay as "subdirectories" (or "sub-directories" which seems to placate Firefox's spell checker) > # Preset locale variables to speed up the build process. Limit locale > # tweaks to this spot to avoid wrong language settings when running > # make menuconfig etc. > diff --git a/README b/README > index 1389e8ff12..f0e9c030de 100644 > --- a/README > +++ b/README > @@ -3087,7 +3087,7 @@ Low Level (hardware related) configuration options: > compiling a NAND SPL. > > - CONFIG_TPL_BUILD > - Modifies the behaviour of start.S when compiling a loader > + Modifies the behaviour of start.S when compiling a loader > that is executed after the SPL and before the actual U-Boot. > It is loaded by the SPL. The correct thing would be to replace "SPL" with "TPL" in the paragraph that follows. But I actually wonder if the content should be updated as one does not usually set SPL_BUILD or TPL_BUILD directly. The are both automatically defined by the build system. > > @@ -3306,7 +3306,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, > etc.: > If you have modified U-Boot sources (for instance added a new board > or support for new devices, a new CPU, etc.) you are expected to > provide feedback to the other developers. The feedback normally takes > -the form of a "patch", i. e. a context diff against a certain (latest > +the form of a "patch", i.e. a context diff against a certain (latest > official or latest in the git repository) version of U-Boot sources. > > But before you submit such a patch, please verify that your modifi- > diff --git a/arch/arm/cpu/armv8/sec_firmware.c > b/arch/arm/cpu/armv8/sec_firmware.c > index 8dc0ac9266..4b3eb71cef 100644 > --- a/arch/arm/cpu/armv8/sec_firmware.c > +++ b/arch/arm/cpu/armv8/sec_firmware.c > @@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void) > return true; > #endif > if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) { > - return true; > + return true; > } > > return false; > diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig > index f5a80b4f0c..1b7f82f596 100644 > --- a/arch/arm/mach-rockchip/Kconfig > +++ b/arch/arm/mach-rockchip/Kconfig > @@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD > Rockchip SoCs have similar boot process, prefer to use TPL for DRAM > init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL > common board is a basic TPL board init which can be shared for most > - of SoCs to avoid copy-pase for different SoCs. > + of SoCs to avoid copy-paste for different SoCs. > > config ROCKCHIP_BOOT_MODE_REG > hex "Rockchip boot mode flag register address" > diff --git a/arch/arm/mach-rockchip/bootrom.c > b/arch/arm/mach-rockchip/bootrom.c > index 9ccb45e6ac..10614c99d9 100644 > --- a/arch/arm/mach-rockchip/bootrom.c > +++ b/arch/arm/mach-rockchip/bootrom.c > @@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd) > * to check it and back to bootrom at very early bootstage(before > * some basic configurations(such as interrupts) been > * changed by TPL/SPL, as the bootrom download operation > - * relys on many default settings(such as interrupts) by > - * it's self. > + * relies on many default settings(such as interrupts) by > + * itself. > */ > static bool check_back_to_brom_dnl_flag(void) > { > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig > b/arch/arm/mach-rockchip/rk3399/Kconfig > index 6660d05349..8e43e52e3c 100644 > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > @@ -6,9 +6,9 @@ choice > config TARGET_EVB_RK3399 > bool "RK3399 evaluation board" > help > - RK3399evb is a evaluation board for Rockchp rk3399, > - with full function and phisical connectors support like type-C > ports, > - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... > + RK3399evb is a evaluation board for Rockchip RK3399, > + with full function and physical connectors support like Type-C > ports, > + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... > > config TARGET_PUMA_RK3399 > bool "Theobroma Systems RK3399-Q7 (Puma)" > diff --git a/arch/arm/mach-rockchip/spl-boot-order.c > b/arch/arm/mach-rockchip/spl-boot-order.c > index fa8e096426..c147d5821e 100644 > --- a/arch/arm/mach-rockchip/spl-boot-order.c > +++ b/arch/arm/mach-rockchip/spl-boot-order.c > @@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node) > /* > * This should eventually move into the SPL code, once SPL becomes > * aware of the block-device layer. Until then (and to avoid unneeded > - * delays in getting this feature out, it lives at the board-level). > + * delays in getting this feature out), it lives at the board-level. > */ > if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { > struct udevice *dev; > diff --git a/board/rockchip/evb_rk3399/README > b/board/rockchip/evb_rk3399/README > index ea3258cf37..da7ae89ab1 100644 > --- a/board/rockchip/evb_rk3399/README > +++ b/board/rockchip/evb_rk3399/README > @@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: > * DRAM: 4GB-128MB dual-channel > * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 > * SD/MMC: support SD 3.0, MMC 4.51 > -* USB: USB3.0 typc-C port *2 with dwc3 controller > +* USB: USB3.0 type-C port *2 with dwc3 controller > * USB2.0 EHCI host port *2 > * Display: RGB/HDMI/DP/MIPI/EDP > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index 8f0ba8ef83..19da82725a 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -268,7 +268,7 @@ config SPL_BANNER_PRINT > default y > help > If this option is enabled, SPL will print the banner with version > - info. Disabling this option could be useful to reduce TPL boot time > + info. Disabling this option could be useful to reduce SPL boot time > (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). > > config TPL_BANNER_PRINT > @@ -277,7 +277,7 @@ config TPL_BANNER_PRINT > default y > help > If this option is enabled, SPL will not print the banner with > version There's another one just here ~~^ > - info. Disabling this option could be useful to reduce SPL boot time > + info. Disabling this option could be useful to reduce TPL boot time > (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). > > config SPL_EARLY_BSS > diff --git a/doc/README.SPL b/doc/README.SPL > index 6eed83f8c5..3c931ec720 100644 > --- a/doc/README.SPL > +++ b/doc/README.SPL > @@ -75,7 +75,7 @@ with: > - the nodes with one pre-relocation property: > 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' > > -ftgrep is also used to remove: > +fdtgrep is also used to remove: > - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS > - all the pre-relocation properties > ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl') > diff --git a/doc/README.TPL b/doc/README.TPL > index c94129fdc9..72027fd692 100644 > --- a/doc/README.TPL > +++ b/doc/README.TPL > @@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with > -DCONFIG_TPL_BUILD. > > The SPL options are shared by SPL and TPL, the board config file should > determine which SPL options to choose based on whether CONFIG_TPL_BUILD > -is set. Source files can be compiled for TPL with options choosed in the > +is set. Source files can be compiled for TPL with options chosen in the > board config file. > > TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with > diff --git a/doc/uImage.FIT/source_file_format.txt > b/doc/uImage.FIT/source_file_format.txt > index f8e27ed34e..18d2aedcb7 100644 > --- a/doc/uImage.FIT/source_file_format.txt > +++ b/doc/uImage.FIT/source_file_format.txt > @@ -262,7 +262,7 @@ o config-1 > - loadables : Unit name containing a list of additional binaries to be > loaded at their given locations. "loadables" is a comma-separated list > of strings. U-Boot will load each binary at its given start-address and > - may optionaly invoke additional post-processing steps on this binary > based > + may optionally invoke additional post-processing steps on this binary > based > on its component image node type. > - compatible : The root compatible string of the U-Boot device tree that > this configuration shall automatically match when CONFIG_FIT_BEST_MATCH > is > diff --git a/tools/binman/README b/tools/binman/README > index c96a564226..47254bd1e6 100644 > --- a/tools/binman/README > +++ b/tools/binman/README > @@ -73,7 +73,7 @@ any dependencies between them > and brought in as needed > - Provides for a standard image description available in the build and at > run-time > -- SoC-specific image-signing tools can be accomodated > +- SoC-specific image-signing tools can be accommodated > - Avoids cluttering the U-Boot build system with image-building code > - The image description is automatically available at run-time in U-Boot, > SPL. It can be made available to other software also > diff --git a/tools/binman/README.entries b/tools/binman/README.entries > index 1099433521..0576e63a86 100644 > --- a/tools/binman/README.entries > +++ b/tools/binman/README.entries > @@ -519,7 +519,7 @@ Properties / Entry arguments: > > This file contains code used by the SoC that is required to make it work. > The Management Engine is like a background task that runs things that are > -not clearly documented, but may include keyboard, deplay and network > +not clearly documented, but may include keyboard, display and network > access. For platform that use ME it is not possible to disable it. U-Boot > does not directly execute code in the ME binary. > > @@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx > bootpg + resetvec code f > Properties / Entry arguments: > - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') > > -This enrty is valid for PowerPC mpc85xx cpus. This entry holds > +This entry is valid for PowerPC mpc85xx cpus. This entry holds > 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be > placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'. > Other than the things I've pointed out Reviewed-by: Chris Packham <judge.pack...@gmail.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot