> -----Original Message-----
> From: Priyanka Jain <[email protected]>
> Sent: 2019年11月15日 12:57
> To: Biwen Li <[email protected]>; Shengzhou Liu <[email protected]>;
> Alison Wang <[email protected]>; Jagdish Gediya
> <[email protected]>; Rajesh Bhagat <[email protected]>
> Cc: Jiafei Pan <[email protected]>; Xiaobo Xie <[email protected]>;
> [email protected]; Biwen Li <[email protected]>
> Subject: RE: [v2] include/configs: ls1012a: add pfe stop command
>
>
>
> >-----Original Message-----
> >From: Biwen Li <[email protected]>
> >Sent: Thursday, November 14, 2019 10:15 AM
> >To: Shengzhou Liu <[email protected]>; Alison Wang
> ><[email protected]>; Jagdish Gediya <[email protected]>; Rajesh
> >Bhagat <[email protected]>; Priyanka Jain <[email protected]>
> >Cc: Jiafei Pan <[email protected]>; Xiaobo Xie <[email protected]>;
> >u- [email protected]; Biwen Li <[email protected]>
> >Subject: [v2] include/configs: ls1012a: add pfe stop command
> >
> >This adds pfe stop command before enter linux kernel to fix a problem
> >that ethernet won't be workable after enter linux
> >
> >Why need execute the command before enter linux kernel?
> No need to add question. The description needs to be in passive voice.
> Add something like. 'pfe stop' command is required because
Okay, will be update in v3.
> >- There is a h/w limitation in LS1012A PFE, to
> > re-initialize PFE it has to be safe shutdown,
> > these steps are done through PFE stop.
> >
> >Signed-off-by: Biwen Li <[email protected]>
> >---
> >Changes in v2:
> > - trim subject
> > - add why
> >
> <snip>
> -priyankajain
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
