According to discussion in the Linux PCI list [1], the dma-ranges should be continuous and describe the entire inbound window which the controller can address and not take into account the possible DRAM holes.
Temporarily disable this code which updates the dma-ranges until this meaning is sorted out. [1] PCI: rcar: Do not abort on too many inbound dma-ranges Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> --- arch/arm/mach-rmobile/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig index 8343000c8f..8cef3f5675 100644 --- a/arch/arm/mach-rmobile/Kconfig +++ b/arch/arm/mach-rmobile/Kconfig @@ -21,7 +21,6 @@ config RCAR_GEN3 imply CMD_GPT imply CMD_UUID imply CMD_MMC_SWRITE if MMC - imply OF_BOARD_SETUP if PCI imply SUPPORT_EMMC_RPMB if MMC imply SPL imply SPL_BOARD_INIT -- 2.24.0.432.g9d3f5f5b63 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
