Dear Ben Warren, In message <[email protected]> you wrote: > > > Wolfgang, > > The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934: > Wolfgang Denk (1): > Make sure that argv[] argument pointers are not modified. > > are available in the git repository at: > > git://git.denx.de/u-boot-net.git master > > Albert Aribaud (7): > kirkwood_egiga: bugfix: add DMA sequence points > kirkwood_egiga: updates: fix DRAM mapping and typo > kirkwood_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION > net: rename: kirkwood_egiga as mvgbe > mvgbe: support SoCs other than kirkwood > mvgbe: add support for orion5x GbE controller > edminiv2: add ethernet support > > Ben Warren (1): > Write MAC address automatically on MACB-based boards > > Eric Bénard (2): > at91_emac: Write MAC address automatically > cpuat91: unbreak ethernet > > Heiko Schocher (1): > tsec: add micrel ksz804 phy > > Hoan Hoang (3): > AX88180: fix media typos > AX88180: add support for the Marvell 88E1118 phy > AX88180: make OUTW handle 32bit/16bit defines too > > Juergen Kilb (1): > smc91xx_eeprom: Correct chip detection check. > > Mike Frysinger (7): > net: dm9000x: re-add casts to I/O pointers to fix gcc warnings > AX88180: add missing init prototype > AX88180: improve phy searching > AX88180: switch to common mii.h header > net: warn about spaces in device names > uli526x: drop newlines from device name > AX88180: use standard I/O accessors > > Stefan Roese (1): > net: Add option to disable fiber on M88E1111 PHY for PPC4xx > > Timur Tabi (1): > tsec: fix the return value for tsec_eth_init() > > Vipin KUMAR (1): > SPEAr : Network driver support added > > arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 4 +- > arch/arm/cpu/arm926ejs/orion5x/cpu.c | 8 + > arch/arm/include/asm/arch-kirkwood/kirkwood.h | 5 + > arch/arm/include/asm/arch-orion5x/orion5x.h | 4 + > board/LaCie/edminiv2/edminiv2.c | 36 ++ > board/LaCie/edminiv2/edminiv2.h | 41 ++ > board/afeb9260/afeb9260.c | 7 - > board/atmel/at91cap9adk/at91cap9adk.c | 7 - > board/atmel/at91sam9260ek/at91sam9260ek.c | 7 - > board/atmel/at91sam9263ek/at91sam9263ek.c | 7 - > board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 7 - > board/calao/sbc35_a9g20/sbc35_a9g20.c | 7 - > board/eukrea/cpu9260/cpu9260.c | 7 - > board/ronetix/pm9263/pm9263.c | 7 - > doc/README.designware_eth | 25 + > drivers/net/4xx_enet.c | 5 + > drivers/net/Makefile | 3 +- > drivers/net/at91_emac.c | 60 ++- > drivers/net/ax88180.c | 137 ++++--- > drivers/net/ax88180.h | 104 ++--- > drivers/net/designware.c | 531 > +++++++++++++++++++++++ > drivers/net/designware.h | 264 +++++++++++ > drivers/net/dm9000x.c | 12 +- > drivers/net/kirkwood_egiga.h | 505 --------------------- > drivers/net/macb.c | 23 +- > drivers/net/{kirkwood_egiga.c => mvgbe.c} | 377 +++++++++-------- > drivers/net/mvgbe.h | 505 +++++++++++++++++++++ > drivers/net/tsec.c | 37 ++- > drivers/net/uli526x.c | 2 +- > examples/standalone/smc911x_eeprom.c | 2 +- > include/configs/cpuat91.h | 9 +- > include/configs/edminiv2.h | 19 +- > include/configs/guruplug.h | 4 +- > include/configs/km_arm.h | 4 +- > include/configs/mv88f6281gtw_ge.h | 4 +- > include/configs/openrd_base.h | 4 +- > include/configs/rd6281a.h | 4 +- > include/configs/sheevaplug.h | 4 +- > include/netdev.h | 4 +- > net/eth.c | 3 + > 40 files changed, 1898 insertions(+), 907 deletions(-) > create mode 100644 board/LaCie/edminiv2/edminiv2.h > create mode 100644 doc/README.designware_eth > create mode 100644 drivers/net/designware.c > create mode 100644 drivers/net/designware.h > delete mode 100644 drivers/net/kirkwood_egiga.h > rename drivers/net/{kirkwood_egiga.c => mvgbe.c} (60%) > create mode 100644 drivers/net/mvgbe.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "Don't try to outweird me, three-eyes. I get stranger things than you free with my breakfast cereal." - Zaphod Beeblebrox in "Hitchhiker's Guide to the Galaxy" _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
