Enable configs related to DMA and Ethernet so as to support networking at U-Boot prompt
Signed-off-by: Vignesh Raghavendra <[email protected]> --- configs/j721e_evm_a72_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index f9396e612b02..748179e82317 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -49,6 +49,7 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board" CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y @@ -59,6 +60,8 @@ CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_TI_SCI=y +CONFIG_DMA_CHANNELS=y +CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_TI_SCI_PROTOCOL=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y @@ -77,6 +80,10 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_HBMC_AM654=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_TI=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_TI_AM65_CPSW_NUSS=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set CONFIG_SPL_PINCTRL=y @@ -91,6 +98,7 @@ CONFIG_RESET_TI_SCI=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y +CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y -- 2.24.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
