Hello, Am Dienstag, 19. November 2019, 13:12:20 CET schrieb Alexander Dahl: > > Further investigation shows that the error is caused by that there is > > c-type comments (/*...*/) in imximage.cfg file. When I remove all the > > c-type comments in the file, it works fine. > > Well, -n sets a name in the image header. I guess you have those '/*...*/' > in your file 'overlay_img'?
At least I thought from the documentation, then I saw this when building 'riotboard_defconfig' from U-Boot 2016.11: arm-v7a-linux-gnueabihf-gcc -E -Wp,-MD,board/boundary/ nitrogen6x/.nitrogen6s1g.cfg.cfgtmp.d -nostdinc -isystem /opt/ OSELAS.Toolchain-2016.06.1/arm-v7a-linux-g nueabihf/gcc-5.4.0-glibc-2.23-binutils-2.26-kernel-4.6-sanitized/lib/gcc/arm- v7a-linux-gnueabihf/5.4.0/include -Iinclude -I/home/adahl/Work/bsp/tt- generic/platf orm-v7a/build-target/u-boot-2016.11/include -I/home/adahl/Work/bsp/tt- generic/platform-v7a/build-target/u-boot-2016.11/arch/arm/include -include / home/adahl/Wor k/bsp/tt-generic/platform-v7a/build-target/u-boot-2016.11/include/linux/ kconfig.h -D__KERNEL__ -D__UBOOT__ -D__ARM__ -marm -mno-thumb-interwork - mabi=aapcs-linux -mword-relocations -fno-pic -mno-unaligned-access -ffunction-sections -fdata- sections -fno-common -ffixed-r9 -msoft-float -pipe -march=armv7-a - D__LINUX_ARM_ARCH__=7 -x c -o board/boundary/nitrogen6x/ nitrogen6s1g.cfg.cfgtmp /home/adahl/Work/bsp/tt-generic/platform-v7a/build- target/u-boot-2016.11/board/boundary/nitrogen6x/nitrogen6s1g.cfg ./tools/mkimage -n board/boundary/nitrogen6x/nitrogen6s1g.cfg.cfgtmp -T imximage -e 0x17800000 -d u-boot.bin u-boot.imx Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 442368 Bytes = 432.00 kB = 0.42 MB Load Address: 177ff420 Entry Point: 17800000 Looks like -n behaves differently when called with '-T imximage'? However it is quite clear from the first call how to get the appropriate file without C comments: use the C preprocessor on the input file, this not only removes those comments, but also resolves includes. To just create that imximage though, you only have to configure U-Boot correctly and it will drop out of the usual call to make without calling mkimage manually. A _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
