doing so helps avant garde users, such as those using simulators that allow users to configure the number of cores, so as to not have to manually adjust u-boot sources. h/w should also be reliably setting FRR NCPU in the future.
Signed-off-by: Kim Phillips <[email protected]> --- arch/powerpc/cpu/mpc8xxx/cpu.c | 10 ++++++++-- arch/powerpc/include/asm/immap_85xx.h | 2 ++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 22f3423..89434e1 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -104,8 +104,14 @@ struct cpu_type *identify_cpu(u32 ver) } int cpu_numcores() { - struct cpu_type *cpu; - cpu = gd->cpu; + ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC85xx_PIC_ADDR; + struct cpu_type *cpu = gd->cpu; + + /* better to query feature reporting register than just assume 1 */ + if (cpu == &cpu_type_unknown) + return ((in_be32(&pic->frr) & MPC85xx_PICFRR_NCPU_MASK) >> + MPC85xx_PICFRR_NCPU_SHIFT) + 1; + return cpu->num_cores; } diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index a37bc80..e1d077b 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -759,6 +759,8 @@ typedef struct ccsr_pic { u32 eoi; /* End Of IRQ */ u8 res9[3916]; u32 frr; /* Feature Reporting */ +#define MPC85xx_PICFRR_NCPU_MASK 0x00001f00 +#define MPC85xx_PICFRR_NCPU_SHIFT 8 u8 res10[28]; u32 gcr; /* Global Configuration */ #define MPC85xx_PICGCR_RST 0x80000000 -- 1.7.1.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
