Hello Alexander, i made a mistake in configuration (i did'n run mkconfig), uBoot 2010-06 works correctly. Sorry for the confusion.
Best regards Radiovan Vapenik > ------------ Původní zpráva ------------ > Od: Alexander Stein <[email protected]> > Předmět: Re: [U-Boot] U-boot and AT91SAM9263-EK > Datum: 14.7.2010 17:57:41 > ---------------------------------------- > Hello, > > Am Mittwoch, 14. Juli 2010, 17:05:47 schrieb Radovan Vápeník: > > i have compiled new u-boot (2010-06) for at91sam9263-ek and I have problem > > with access and save environment variables to NAND Flash. When I set any > > environment variable and save it to Nand (saveenv), uBoot shows me > > "Saving Environment to NAND..." and after it shows the command prompt. The > > saved variable is not set after reset. The last version, where saving > > works correctly, is uBoot-2009-11. The variable CONFIG_SYS_USE_NANDFLASH > > is set in config.h, so variables should be saved to NandFlash. What has > > been changed in the new uBoot / what i am doing wrong? > > Last time I build u-boot for 9263-ek was also 2009.11. You may want to git > bisect into this problem to find the commit where the problem starts. But > don't forget to distclean before. > > Best regards, > Alexander > > > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
