On Fri, Oct 25, 2019 at 7:30 PM Michael Walle <mich...@walle.cc> wrote: > > The delay_config() code could only set the delay bit. Thus, it could > only enable the delay mode, but not disable it. To make things worse, > the RX delay mode is enabled by default after a hardware reset, so it > could never be disabled. Fix this, by always setting or clearing the > bits. This is also how the linux kernel configures the PHY. > > If bisecting shows that this commit breaks your board you probably have > a wrong PHY interface mode. You probably want the > PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode. > > Signed-off-by: Michael Walle <mich...@walle.cc>
Either the offending dts's are already updated or they will be when this breaks them. It's been 6 months. Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
