Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.
Signed-off-by: Heiko Schocher <[email protected]>
---
board/aristainetos/aristainetos.c | 35 -------------------------------
configs/aristainetos2_defconfig | 4 ++++
include/configs/aristainetos2.h | 3 ---
3 files changed, 4 insertions(+), 38 deletions(-)
diff --git a/board/aristainetos/aristainetos.c
b/board/aristainetos/aristainetos.c
index 5639eefa15..c2218cb5c2 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -102,15 +102,6 @@ struct i2c_pads_info i2c_pad_info4 = {
}
};
-static iomux_v3_cfg_t const misc_pads[] = {
- /* USB_OTG_ID = GPIO1_24*/
- MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* H1 Power enable = GPIO1_0*/
- MX6_PAD_GPIO_0__USB_H1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* OTG Power enable = GPIO4_15*/
- MX6_PAD_KEY_ROW4__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -815,7 +806,6 @@ int board_init(void)
/* GPIO_1 for USB_OTG_ID */
clrsetbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK, 0);
- imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
return 0;
}
@@ -825,31 +815,6 @@ int checkboard(void)
return 0;
}
-#ifdef CONFIG_USB_EHCI_MX6
-int board_ehci_hcd_init(int port)
-{
- int ret;
-
- ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr");
- if (!ret)
- gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1);
- ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr");
- if (!ret)
- gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1);
- return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
- if (port)
- gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
- else
- gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
-
- return 0;
-}
-#endif
-
int board_fit_config_name_match(const char *name)
{
if (gd->board_type == BOARD_TYPE_4 &&
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index 4253e4b562..05af602dc8 100644
--- a/configs/aristainetos2_defconfig
+++ b/configs/aristainetos2_defconfig
@@ -77,11 +77,15 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
CONFIG_PWM_IMX=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index b008928c06..269162eabf 100644
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -31,8 +31,6 @@
"ubifsload ${fit_addr_r} /boot/system.itb; " \
"imi ${fit_addr_r}\0 "
-#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
-#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(1, 0)
#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
/* Framebuffer */
@@ -189,7 +187,6 @@
#define CONFIG_RTC_M41T11
/* USB Configs */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
--
2.21.0
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
