On 2019/11/28 下午2:14, Vasily Khoruzhick wrote:
Rockpro64 doesn't boot reliably after soft reset, so let's force power on
reset by asserting sysreset pin if we detected soft reset.
Signed-off-by: Vasily Khoruzhick <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Thanks,
- Kever
---
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 8 ++++++++
configs/rockpro64-rk3399_defconfig | 1 +
2 files changed, 9 insertions(+)
diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
index 4648513ea9..bb94bcf7be 100644
--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -6,11 +6,19 @@
#include "rk3399-u-boot.dtsi"
#include "rk3399-sdram-lpddr4-100.dtsi"
/ {
+ config {
+ sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
+
chosen {
u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
};
};
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
&vdd_center {
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
diff --git a/configs/rockpro64-rk3399_defconfig
b/configs/rockpro64-rk3399_defconfig
index 49e27c91cb..d153ac5485 100644
--- a/configs/rockpro64-rk3399_defconfig
+++ b/configs/rockpro64-rk3399_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_TARGET_ROCKPRO64_RK3399=y
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
