On 2019/11/26 上午9:39, David Wu wrote:
Add the glue code to allow the rk3308 variant of the Rockchip gmac
to provide network functionality.

Signed-off-by: David Wu <david...@rock-chips.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
- Kever
---
  drivers/net/gmac_rockchip.c | 65 +++++++++++++++++++++++++++++++++++++
  1 file changed, 65 insertions(+)

diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c
index d2c52b4c46..e152faf083 100644
--- a/drivers/net/gmac_rockchip.c
+++ b/drivers/net/gmac_rockchip.c
@@ -17,6 +17,7 @@
  #include <asm/arch-rockchip/grf_px30.h>
  #include <asm/arch-rockchip/grf_rk322x.h>
  #include <asm/arch-rockchip/grf_rk3288.h>
+#include <asm/arch-rk3308/grf_rk3308.h>
  #include <asm/arch-rockchip/grf_rk3328.h>
  #include <asm/arch-rockchip/grf_rk3368.h>
  #include <asm/arch-rockchip/grf_rk3399.h>
@@ -173,6 +174,47 @@ static int rk3288_gmac_fix_mac_speed(struct dw_eth_dev 
*priv)
        return 0;
  }
+static int rk3308_gmac_fix_mac_speed(struct dw_eth_dev *priv)
+{
+       struct rk3308_grf *grf;
+       struct clk clk_speed;
+       int speed, ret;
+       enum {
+               RK3308_GMAC_SPEED_SHIFT = 0x0,
+               RK3308_GMAC_SPEED_MASK  = BIT(0),
+               RK3308_GMAC_SPEED_10M   = 0,
+               RK3308_GMAC_SPEED_100M  = BIT(0),
+       };
+
+       ret = clk_get_by_name(priv->phydev->dev, "clk_mac_speed",
+                             &clk_speed);
+       if (ret)
+               return ret;
+
+       switch (priv->phydev->speed) {
+       case 10:
+               speed = RK3308_GMAC_SPEED_10M;
+               ret = clk_set_rate(&clk_speed, 2500000);
+               if (ret)
+                       return ret;
+               break;
+       case 100:
+               speed = RK3308_GMAC_SPEED_100M;
+               ret = clk_set_rate(&clk_speed, 25000000);
+               if (ret)
+                       return ret;
+               break;
+       default:
+               debug("Unknown phy speed: %d\n", priv->phydev->speed);
+               return -EINVAL;
+       }
+
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+       rk_clrsetreg(&grf->mac_con0, RK3308_GMAC_SPEED_MASK, speed);
+
+       return 0;
+}
+
  static int rk3328_gmac_fix_mac_speed(struct dw_eth_dev *priv)
  {
        struct rk3328_grf_regs *grf;
@@ -377,6 +419,22 @@ static void rk3288_gmac_set_to_rgmii(struct 
gmac_rockchip_platdata *pdata)
                     pdata->tx_delay << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT);
  }
+static void rk3308_gmac_set_to_rmii(struct gmac_rockchip_platdata *pdata)
+{
+       struct rk3308_grf *grf;
+       enum {
+               RK3308_GMAC_PHY_INTF_SEL_SHIFT = 2,
+               RK3308_GMAC_PHY_INTF_SEL_MASK  = GENMASK(4, 2),
+               RK3308_GMAC_PHY_INTF_SEL_RMII  = BIT(4),
+       };
+
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+       rk_clrsetreg(&grf->mac_con0,
+                    RK3308_GMAC_PHY_INTF_SEL_MASK,
+                    RK3308_GMAC_PHY_INTF_SEL_RMII);
+}
+
  static void rk3328_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata)
  {
        struct rk3328_grf_regs *grf;
@@ -646,6 +704,11 @@ const struct rk_gmac_ops rk3288_gmac_ops = {
        .set_to_rgmii = rk3288_gmac_set_to_rgmii,
  };
+const struct rk_gmac_ops rk3308_gmac_ops = {
+       .fix_mac_speed = rk3308_gmac_fix_mac_speed,
+       .set_to_rmii = rk3308_gmac_set_to_rmii,
+};
+
  const struct rk_gmac_ops rk3328_gmac_ops = {
        .fix_mac_speed = rk3328_gmac_fix_mac_speed,
        .set_to_rgmii = rk3328_gmac_set_to_rgmii,
@@ -673,6 +736,8 @@ static const struct udevice_id rockchip_gmac_ids[] = {
          .data = (ulong)&rk3228_gmac_ops },
        { .compatible = "rockchip,rk3288-gmac",
          .data = (ulong)&rk3288_gmac_ops },
+       { .compatible = "rockchip,rk3308-mac",
+         .data = (ulong)&rk3308_gmac_ops },
        { .compatible = "rockchip,rk3328-gmac",
          .data = (ulong)&rk3328_gmac_ops },
        { .compatible = "rockchip,rk3368-gmac",


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to