Not all architectures(i.e. i.MXRT) support mxc_get_clock() and use DM_CLK
instead. So building could result in failure due to missing
mxc_get_clock().
Make if(CONFIG_IS_ENABLED(CLK)) an #if statement.
Signed-off-by: Giulio Benetti <giulio.bene...@benettiengineering.com>
---
drivers/mmc/fsl_esdhc_imx.c | 38 ++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index f1afab742d..afdca9cd07 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -1514,27 +1514,27 @@ static int fsl_esdhc_probe(struct udevice *dev)
init_clk_usdhc(dev->seq);
- if (CONFIG_IS_ENABLED(CLK)) {
- /* Assigned clock already set clock */
- ret = clk_get_by_name(dev, "per", &priv->per_clk);
- if (ret) {
- printf("Failed to get per_clk\n");
- return ret;
- }
- ret = clk_enable(&priv->per_clk);
- if (ret) {
- printf("Failed to enable per_clk\n");
- return ret;
- }
+#if CONFIG_IS_ENABLED(CLK)
+ /* Assigned clock already set clock */
+ ret = clk_get_by_name(dev, "per", &priv->per_clk);
+ if (ret) {
+ printf("Failed to get per_clk\n");
+ return ret;
+ }
+ ret = clk_enable(&priv->per_clk);
+ if (ret) {
+ printf("Failed to enable per_clk\n");
+ return ret;
+ }
- priv->sdhc_clk = clk_get_rate(&priv->per_clk);
- } else {
- priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq);
- if (priv->sdhc_clk <= 0) {
- dev_err(dev, "Unable to get clk for %s\n", dev->name);
- return -EINVAL;
- }
+ priv->sdhc_clk = clk_get_rate(&priv->per_clk);
+#else
+ priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq);
+ if (priv->sdhc_clk <= 0) {
+ dev_err(dev, "Unable to get clk for %s\n", dev->name);
+ return -EINVAL;
}
+#endif
ret = fsl_esdhc_init(priv, plat);
if (ret) {
--
2.20.1
