Am 2019-12-10 15:55, schrieb Alex Marginean:
Passes on the primary address used by u-boot to Linux. The code does a
DT
fix-up for ENETC PFs and sets the primary MAC address in IERB. The
address
in IERB is restored on ENETC PCI functions at FLR.
I don't get the reason why this is done in a proprietary way. What is
the
difference between any other network interface whose hardware address is
set up in the generic u-boot code.
Also, shouldn't write_hwaddr callback be implemented instead of the
enetc_set_ierb_primary_mac()?
-michael
Signed-off-by: Alex Marginean <[email protected]>
---
The code is called fom ft_board_setup in
board/freescale/ls1028a/ls1028a.c
mostly for consistency with other LS parts. I'm open to suggestions
though.
Changes in v2:
- fixed warning for fdt_fixup_enetc_mac being implicitly declared
board/freescale/ls1028a/ls1028a.c | 5 +++
drivers/net/fsl_enetc.c | 65 ++++++++++++++++++++++++++++++-
drivers/net/fsl_enetc.h | 3 ++
3 files changed, 72 insertions(+), 1 deletion(-)
diff --git a/board/freescale/ls1028a/ls1028a.c
b/board/freescale/ls1028a/ls1028a.c
index a9606b8865..1a82c95402 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -25,6 +25,7 @@
#include <fdtdec.h>
#include <miiphy.h>
#include "../common/qixis.h"
+#include "../drivers/net/fsl_enetc.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -150,6 +151,10 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_icid(blob);
+#ifdef CONFIG_FSL_ENETC
+ fdt_fixup_enetc_mac(blob);
+#endif
+
return 0;
}
#endif
diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c
index 0ca7e838a8..3c043888db 100644
--- a/drivers/net/fsl_enetc.c
+++ b/drivers/net/fsl_enetc.c
@@ -14,6 +14,69 @@
#include "fsl_enetc.h"
+#define ENETC_DRIVER_NAME "enetc_eth"
+
+/*
+ * sets the MAC address in IERB registers, this setting is persistent
and
+ * carried over to Linux.
+ */
+static void enetc_set_ierb_primary_mac(struct udevice *dev, int devfn,
+ const u8 *enetaddr)
+{
+#ifdef CONFIG_ARCH_LS1028A
+/*
+ * LS1028A is the only part with IERB at this time and there are
plans to change
+ * its structure, keep this LS1028A specific for now
+ */
+#define IERB_BASE 0x1f0800000ULL
+#define IERB_PFMAC(pf, vf, n) (IERB_BASE + 0x8000 + (pf) * 0x100 +
(vf) * 8 \
+ + (n) * 4)
+
+static int ierb_fn_to_pf[] = {0, 1, 2, -1, -1, -1, 3};
wrong indendation
+
+ u16 lower = *(const u16 *)(enetaddr + 4);
+ u32 upper = *(const u32 *)enetaddr;
+
+ if (ierb_fn_to_pf[devfn] < 0)
+ return;
it would be easier to read if ierb_fn_to_pf[devfn] would be assigned to
a local variable.
+
+ out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 0), upper);
+ out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 1), (u32)lower);
+#endif
+}
+
+/* sets up primary MAC addresses in DT/IERB */
+void fdt_fixup_enetc_mac(void *blob)
+{
+ struct pci_child_platdata *ppdata;
+ struct eth_pdata *pdata;
+ struct udevice *dev;
+ struct uclass *uc;
+ char path[256];
+ int offset;
+ int devfn;
+
+ uclass_get(UCLASS_ETH, &uc);
+ uclass_foreach_dev(dev, uc) {
+ if (!dev->driver || !dev->driver->name ||
+ strcmp(dev->driver->name, ENETC_DRIVER_NAME))
+ continue;
+
+ pdata = dev_get_platdata(dev);
+ ppdata = dev_get_parent_platdata(dev);
+ devfn = PCI_FUNC(ppdata->devfn);
+
+ enetc_set_ierb_primary_mac(dev, devfn, pdata->enetaddr);
+
+ snprintf(path, 256, "/soc/pcie@1f0000000/ethernet@%x,%x",
+ PCI_DEV(ppdata->devfn), PCI_FUNC(ppdata->devfn));
+ offset = fdt_path_offset(blob, path);
+ if (offset < 0)
+ continue;
+ fdt_setprop(blob, offset, "mac-address", pdata->enetaddr, 6);
+ }
+}
+
/*
* Bind the device:
* - set a more explicit name on the interface
@@ -583,7 +646,7 @@ static const struct eth_ops enetc_ops = {
};
U_BOOT_DRIVER(eth_enetc) = {
- .name = "enetc_eth",
+ .name = ENETC_DRIVER_NAME,
.id = UCLASS_ETH,
.bind = enetc_bind,
.probe = enetc_probe,
diff --git a/drivers/net/fsl_enetc.h b/drivers/net/fsl_enetc.h
index 0bb4cdff47..e441891468 100644
--- a/drivers/net/fsl_enetc.h
+++ b/drivers/net/fsl_enetc.h
@@ -226,4 +226,7 @@ int enetc_mdio_read_priv(struct enetc_mdio_priv
*priv, int addr, int devad,
int enetc_mdio_write_priv(struct enetc_mdio_priv *priv, int addr, int
devad,
int reg, u16 val);
+/* sets up primary MAC addresses in DT/IERB */
+void fdt_fixup_enetc_mac(void *blob);
+
#endif /* _ENETC_H */
