On 2019/12/5 下午6:58, Jeffy Chen wrote:
Add documentation about packing optional second level boot-loader with
mkimage tool.
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Thanks,
- Kever
---
Changes in v2: None
doc/README.rockchip | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 67c14006a3..39dc9c5e9f 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -341,6 +341,12 @@ You can create the image via the following operations:
cat firefly-rk3288/u-boot-dtb.bin >> out && \
sudo dd if=out of=/dev/sdc seek=64
+Or:
+ ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
+ firefly-rk3288/spl/u-boot-spl-dtb.bin:firefly-rk3288/u-boot-dtb.bin \
+ out && \
+ sudo dd if=out of=/dev/sdc seek=64
+
If you have an HDMI cable attached you should see a video console.
For evb_rk3036 board:
@@ -348,6 +354,11 @@ For evb_rk3036 board:
cat evb-rk3036/u-boot-dtb.bin >> out && \
sudo dd if=out of=/dev/sdc seek=64
+Or:
+ ./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d \
+ evb-rk3036/spl/u-boot-spl.bin:evb-rk3036/u-boot-dtb.bin out && \
+ sudo dd if=out of=/dev/sdc seek=64
+
Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD,
the
debug uart must be disabled
