> From: Denis Zalevskiy <[email protected]> > DM for PCI pulls DM for ethernet that also needs other changes described > below to build u-boot and keep existing functionality - ability to update > MAC addresses of FEC ethernet adapter and I210 adapter connected to the > Marvell switch. > - fec_mxc driver with DM needs PHYLIB; > - configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig; > - FEC is marked as eth0 because it is always present, so indices changed: > I210 are still probed in the same order; > - board_eth_init() was used by legacy ethernet, setup for enet iomux and > pcie is moved to the board_late_init(); > - pci_init() is called from the board_late_init() to initiate PCI bus > probing, so I210 devices are propagated to the device tree; > Signed-off-by: Denis Zalevskiy <[email protected]> > [Describe PHY reset in device tree] > Signed-off-by: Ian Ray <[email protected]> > Signed-off-by: Robert Beckett <[email protected]> Applied to u-boot-imx, -next, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
