> -----Original Message----- > From: Jagan Teki <[email protected]> > Sent: 10 January 2020 11:13 > To: Guillaume Gardet <[email protected]> > Cc: Simon Glass <[email protected]>; Lin Huang <[email protected]>; u- > [email protected] > Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01 > > On Fri, Jan 10, 2020 at 3:12 PM Guillaume Gardet <[email protected]> > wrote: > > > > Hi, > > > > since 2020.01, SPL image is too large for rk3288 boards (at least > > firefly-rk3288 > and tinker-rk3288), because I get respectively: > > [ 356s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot- > spl.rksd > > [ 356s] Error: SPL image is too large (size 0x9800 than 0x8000) > > And: > > [ 305s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot- > spl.rksd > > [ 305s] Error: SPL image is too large (size 0xb800 than 0x8000) > > Both the board now TPL-enabled, so create boot image with TPL then > concatenate SPL.
What do you mean by "then concatenate SPL"?
