On Tue, Jan 14, 2020 at 10:23 AM Andy Shevchenko <andy.shevche...@gmail.com> wrote: > On Tue, Jan 14, 2020 at 10:21 AM Andy Shevchenko > <andy.shevche...@gmail.com> wrote: > > On Tue, Jan 14, 2020 at 1:14 AM Heinrich Schuchardt <xypron.g...@gmx.de> > > wrote: > > > On 1/13/20 10:52 PM, Andy Shevchenko wrote: > > ... > > > > This image loads fine on current U-Boot, see below. > > > > Of course it does *in the test case you have done*. > > I'm describing different one. The provided image must be a *partition* > > on the real disk. > > > > So, before use it the preparatory steps must be made. > > > > Something like > > > > % dd if=/dev/zero of=image-file bs=1M count=1000 > > % fdisk image-file > > ...create a partition table, where one partition has a (similar) size > > of the image I provided > > % mount -o loop,offset=... image-file /mnt # use *partition* as a disk! > > % dd --sparse if=mmc-fat-part of=/mnt > > % umount /mnt > > > > And use image-file instead. > > Should I prepare it for you or you can do it yourself?
It's there under name image-file.gz Commit messages have the commands I performed to get this image cooked. -- With Best Regards, Andy Shevchenko