Hi Fabio, On Thu, 16 Jan 2020 13:38:26 -0300 Fabio Estevam [email protected] wrote:
> Hi Anatolij, > > On Tue, Jan 14, 2020 at 8:04 PM Anatolij Gustschin <[email protected]> wrote: > > > Currently I do not have an i.MX8QXP MEK board with RevB CPU and cannot > > test, but I have an i.MX8QXP based custom SoM with console on ttyLP2. > > Here I tested with NXP BSP kernel based on branch imx_4.14.98_2.0.0_ga > > and it boots successfully (with NFS rootfs or rootfs on eMMC). > > I have just tested imx_4.14.98_2.0.0_ga and still get the same hang. then it might be due to scfw API incompatibility? > [Adding Marcel] > > Just wondering if anyone else managed to boot mainline U-Boot with > mainline kernel on i.MX8QXP. yesterday I wanted to test some mainline drivers on my SoM and created simple device tree for booting with console output. Mainline kernel v5.5-rc6 booted successfully, (but without FEC support). > If so, what firmware combination was used? Unfortunately, my i.MX8QXP SoM was damaged today and it doesn't boot any more and it is not recoverable, so I cannot check the used firmware hashes. I only know that it was something from 4.14.98_2.0.0_ga release. -- Anatolij
