Signed-off-by: Heiko Schocher <[email protected]>
---
board/apollon/apollon.c | 13 +++++++++++--
board/armltd/integrator/integrator.c | 14 ++++++++++----
board/armltd/integrator/lowlevel_init.S | 2 +-
board/freescale/mx31ads/config.mk | 2 +-
board/freescale/mx31ads/mx31ads.c | 10 ++++++++--
board/freescale/mx31ads/u-boot.lds | 14 +++++++++++++-
board/freescale/mx31pdk/mx31pdk.c | 11 +++++++++--
board/imx31_phycore/config.mk | 2 +-
board/imx31_phycore/imx31_phycore.c | 10 ++++++++--
board/logicpd/imx31_litekit/config.mk | 2 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 11 +++++++++--
board/ti/omap2420h4/config.mk | 6 +++++-
board/ti/omap2420h4/omap2420h4.c | 18 ++++++++++++++++--
include/configs/apollon.h | 7 +++++++
include/configs/imx31_litekit.h | 7 +++++++
include/configs/imx31_phycore.h | 9 +++++++++
include/configs/integratorcp.h | 6 ++++++
include/configs/mx31ads.h | 7 +++++++
include/configs/mx31pdk.h | 7 +++++++
include/configs/omap2420h4.h | 7 +++++++
include/configs/qong.h | 2 +-
nand_spl/board/freescale/mx31pdk/u-boot.lds | 14 +++++++++++++-
onenand_ipl/board/apollon/apollon.c | 23 +++++++++++++++++++++++
onenand_ipl/board/apollon/u-boot.onenand.lds | 15 ++++++++++++++-
24 files changed, 194 insertions(+), 25 deletions(-)
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index 4768f58..5addc55 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -202,6 +202,17 @@ int dram_init(void)
size0 = get_sdr_cs_size(SDRC_CS0_OSET);
size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = size0 + size1;
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
+ unsigned int size0 = 0, size1 = 0;
+
+ size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ size1 = get_sdr_cs_size(SDRC_CS1_OSET);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = size0;
@@ -209,8 +220,6 @@ int dram_init(void)
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
gd->bd->bi_dram[1].size = size1;
#endif
-
- return 0;
}
/**********************************************************
diff --git a/board/armltd/integrator/integrator.c
b/board/armltd/integrator/integrator.c
index 9bb56b5..d0a70b6 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -92,9 +92,6 @@ int misc_init_r (void)
******************************/
int dram_init (void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
#ifdef CONFIG_CM_SPD_DETECT
{
extern void dram_query(void);
@@ -117,14 +114,23 @@ extern void dram_query(void);
*
*/
sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
- gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
+ gd->ram_size = 0x01000000 << sdram_shift;
}
+#else
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
#endif /* CM_SPD_DETECT */
return 0;
}
+void dram_init_banksize (void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
diff --git a/board/armltd/integrator/lowlevel_init.S
b/board/armltd/integrator/lowlevel_init.S
index ab9589c..6f55bb5 100644
--- a/board/armltd/integrator/lowlevel_init.S
+++ b/board/armltd/integrator/lowlevel_init.S
@@ -199,7 +199,7 @@ cm_remap:
/* Now 0x00000000 is writeable, replace the vectors */
ldr r0, =_start /* r0 <- start of vectors */
- ldr r2, =_armboot_start /* r2 <- past vectors */
+ ldr r2, =_TEXT_BASE /* r2 <- past vectors */
sub r1,r1,r1 /* destination 0x00000000 */
copy_vec:
diff --git a/board/freescale/mx31ads/config.mk
b/board/freescale/mx31ads/config.mk
index 7ec0fe2..c2a2ff1 100644
--- a/board/freescale/mx31ads/config.mk
+++ b/board/freescale/mx31ads/config.mk
@@ -1,3 +1,3 @@
-TEXT_BASE = 0x87f00000
+TEXT_BASE = 0xa0000000
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
diff --git a/board/freescale/mx31ads/mx31ads.c
b/board/freescale/mx31ads/mx31ads.c
index bc25c6d..57a2807 100644
--- a/board/freescale/mx31ads/mx31ads.c
+++ b/board/freescale/mx31ads/mx31ads.c
@@ -30,10 +30,16 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
}
int board_init (void)
diff --git a/board/freescale/mx31ads/u-boot.lds
b/board/freescale/mx31ads/u-boot.lds
index 2731294..201fd4f 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -53,11 +53,23 @@ SECTIONS
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
diff --git a/board/freescale/mx31pdk/mx31pdk.c
b/board/freescale/mx31pdk/mx31pdk.c
index 9f47169..e376d3f 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -33,12 +33,19 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
return 0;
}
+void dram_init_banksize (void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
int board_init(void)
{
/* CS5: CPLD incl. network controller */
diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk
index d34dc02..a12c182 100644
--- a/board/imx31_phycore/config.mk
+++ b/board/imx31_phycore/config.mk
@@ -1 +1 @@
-TEXT_BASE = 0x87f00000
+TEXT_BASE = 0xa0000000
diff --git a/board/imx31_phycore/imx31_phycore.c
b/board/imx31_phycore/imx31_phycore.c
index 3d7b7f7..f663c68 100644
--- a/board/imx31_phycore/imx31_phycore.c
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -32,10 +32,16 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
}
int board_init (void)
diff --git a/board/logicpd/imx31_litekit/config.mk
b/board/logicpd/imx31_litekit/config.mk
index d34dc02..a12c182 100644
--- a/board/logicpd/imx31_litekit/config.mk
+++ b/board/logicpd/imx31_litekit/config.mk
@@ -1 +1 @@
-TEXT_BASE = 0x87f00000
+TEXT_BASE = 0xa0000000
diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c
b/board/logicpd/imx31_litekit/imx31_litekit.c
index 2ac622d..2cfb846 100644
--- a/board/logicpd/imx31_litekit/imx31_litekit.c
+++ b/board/logicpd/imx31_litekit/imx31_litekit.c
@@ -31,12 +31,19 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init (void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
return 0;
}
+void dram_init_banksize (void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
int board_init (void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk
index 3edcde0..3d974b2 100644
--- a/board/ti/omap2420h4/config.mk
+++ b/board/ti/omap2420h4/config.mk
@@ -12,9 +12,13 @@
# A000/0000 (bank1) ES2 will be configurable
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
+# with relocation select flash base
+# H4_CS0_BASE
+TEXT_BASE = 0x08000000
+# TEXT_BASE = 0x04000000
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+#TEXT_BASE = 0x80e80000
# Used with full SRAM boot.
# This is either with a GP system or a signed boot image.
diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c
index 1c98e1b..dec1d05 100644
--- a/board/ti/omap2420h4/omap2420h4.c
+++ b/board/ti/omap2420h4/omap2420h4.c
@@ -218,6 +218,22 @@ int dram_init (void)
size0 = get_sdr_cs_size(SDRC_CS0_OSET);
size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+ /* dram_init must store complete ramsize in gd->ram_size */
+ /* here just size0, because ram is not continuos, right? */
+ gd->ram_size = size0;
+
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
+ unsigned int size0 = 0, size1 = 0;
+ u32 rev;
+
+ rev = get_cpu_rev();
+ size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = size0;
if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't
worth doing */
@@ -225,8 +241,6 @@ int dram_init (void)
else /* ES2 and above can remap at 32MB granularity */
gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
gd->bd->bi_dram[1].size = size1;
-
- return 0;
}
/**********************************************************
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index c1295de..30c6c86 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -268,4 +268,11 @@
"-(ubifs)"
#endif
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR (PHYS_SDRAM_1) /* Fix this */
+#define CONFIG_SYS_INIT_RAM_END (0x2000)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 4904856..dfe6552 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -187,4 +187,11 @@
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_MXC_NAND_HWECC
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1dbafa0..404e317 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -28,6 +28,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/mx31-regs.h>
+
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
@@ -202,4 +204,11 @@
#define CONFIG_CMD_BMP 1
#endif
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index caafc93..acccfb2 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -252,5 +252,11 @@ SIB at Block62 End Block62 address 0x24f80000
* In that case comment out the line below.
#undef CONFIG_CM_INIT
*/
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SDRAM_1 /* Fix this */
+#define CONFIG_SYS_INIT_RAM_END (0x2000)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index dedecd7..8f6008c 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -200,4 +200,11 @@
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor0"
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 0414cc3..8ae1a61 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -215,4 +215,11 @@
#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
#define ESDCTL_RW ESDCTL_SETTINGS
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 47437b0..f7ee27c 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -270,4 +270,11 @@
#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)"
*/
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SDRAM_1 /* Fix this */
+#define CONFIG_SYS_INIT_RAM_END (0x2000)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_GBL_DATA_OFFSET)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 0d6718c..00b6001 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -282,7 +282,7 @@ extern int qong_nand_rdy(void *chip);
"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -
CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds
b/nand_spl/board/freescale/mx31pdk/u-boot.lds
index edd8430..ed64119 100644
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds
@@ -19,11 +19,23 @@ SECTIONS
.rodata : { *(.rodata) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
diff --git a/onenand_ipl/board/apollon/apollon.c
b/onenand_ipl/board/apollon/apollon.c
index 4936e00..a8663ed 100644
--- a/onenand_ipl/board/apollon/apollon.c
+++ b/onenand_ipl/board/apollon/apollon.c
@@ -28,6 +28,29 @@ do {
\
writeb(value, reg); \
} while (0)
+#if defined(CONFIG_ENV_IS_EMBEDDED)
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN))
) || \
+ defined(CONFIG_ENV_IS_IN_NVRAM)
+#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE)
+#else
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#endif
+
+void board_init_f (ulong bootflag)
+{
+ ulong addr, addr_sp;
+ gd_t *id;
+
+ addr = TEXT_BASE;
+ /* Pointer is writable since we allocated a register for it */
+ id = (gd_t *) (CONFIG_SYS_INIT_SP_ADDR);
+ addr_sp = addr - TOTAL_MALLOC_LEN;
+
+ relocate_code (addr_sp, id, addr);
+}
+
/*****************************************
* Routine: board_init
* Description: Early hardware init.
diff --git a/onenand_ipl/board/apollon/u-boot.onenand.lds
b/onenand_ipl/board/apollon/u-boot.onenand.lds
index 0960c12..26e2d6a 100644
--- a/onenand_ipl/board/apollon/u-boot.onenand.lds
+++ b/onenand_ipl/board/apollon/u-boot.onenand.lds
@@ -41,11 +41,24 @@ SECTIONS
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
- .data : { *(.data) }
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+
+ __got_start = .;
. = ALIGN(4);
.got : { *(.got) }
+ __got_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) . = ALIGN(4); }
--
1.6.2.5
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
