From: Jason Li <jason...@cortina-access.com>
Add serial UART driver support for all Cortina Access
CAxxxx family of SoCs.
Reviewed-by: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
Signed-off-by: Jason Li <jason...@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirov...@cortina-access.com>
---
Changes in v4: None
Changes in v3:
- clean up comment blocks
- fix rmw of baud rate bitfield change
Changes in v2:
- Rename driver in DT namespace for consistency between all
CA drivers.
- Remove blank line after SPDX identifier
- Remove authorship comment as it is already recorded within Git
and is redundant
- Merge serial_cortina.h reg defines into serial_cortina.c
- Modify ca_serial_pending() and API to get resource.
drivers/serial/Kconfig | 7 ++
drivers/serial/Makefile | 2 +-
drivers/serial/serial_cortina.c | 164 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 172 insertions(+), 1 deletion(-)
create mode 100644 drivers/serial/serial_cortina.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ece7d87..9f76596 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -539,6 +539,13 @@ config BCM6345_SERIAL
help
Select this to enable UART on BCM6345 SoCs.
+config CORTINA_UART
+ bool "Cortina UART support"
+ depends on DM_SERIAL
+ help
+ Select this to enable UART support for Cortina-Access UART devices
+ found on CAxxxx SoCs.
+
config FSL_LINFLEXUART
bool "Freescale Linflex UART support"
depends on DM_SERIAL
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 06ee306..c8f2db4 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,13 +28,13 @@ obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
endif
-
obj-$(CONFIG_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
obj-$(CONFIG_AR933X_UART) += serial_ar933x.o
obj-$(CONFIG_ARM_DCC) += arm_dcc.o
obj-$(CONFIG_ATMEL_USART) += atmel_usart.o
obj-$(CONFIG_BCM6345_SERIAL) += serial_bcm6345.o
+obj-$(CONFIG_CORTINA_UART) += serial_cortina.o
obj-$(CONFIG_EFI_APP) += serial_efi.o
obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
obj-$(CONFIG_MCFUART) += mcfuart.o
diff --git a/drivers/serial/serial_cortina.c b/drivers/serial/serial_cortina.c
new file mode 100644
index 0000000..4f227bf
--- /dev/null
+++ b/drivers/serial/serial_cortina.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Cortina-Access Ltd.
+ * Common UART Driver for Cortina Access CAxxxx line of SoCs
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <serial.h>
+#include <linux/compiler.h>
+
+/* Register definitions */
+#define UCFG 0x00 /* UART config register */
+#define UFC 0x04 /* Flow Control */
+#define URX_SAMPLE 0x08 /* UART RX Sample register */
+#define URT_TUNE 0x0C /* Fine tune of UART clk */
+#define UTX_DATA 0x10 /* UART TX Character data */
+#define URX_DATA 0x14 /* UART RX Character data */
+#define UINFO 0x18 /* UART Info */
+#define UINT_EN0 0x1C /* UART Interrupt enable 0 */
+#define UINT_EN1 0x20 /* UART Interrupt enable 1 */
+#define UINT0 0x24 /* UART Interrupt 0 setting/clearing */
+#define UINT1 0x28 /* UART Interrupt 1 setting/clearing */
+#define UINT_STAT 0x2C /* UART Interrupt Status */
+
+/* UART Control Register Bit Fields */
+#define UCFG_BAUD_COUNT_MASK 0xFFFFFF00
+#define UCFG_BAUD_COUNT(x) ((x << 8) & UCFG_BAUD_COUNT_MASK)
+#define UCFG_EN BIT(7)
+#define UCFG_RX_EN BIT(6)
+#define UCFG_TX_EN BIT(5)
+#define UCFG_PARITY_EN BIT(4)
+#define UCFG_PARITY_SEL BIT(3)
+#define UCFG_2STOP_BIT BIT(2)
+#define UCFG_CNT1 BIT(1)
+#define UCFG_CNT0 BIT(0)
+#define UCFG_CHAR_5 0
+#define UCFG_CHAR_6 1
+#define UCFG_CHAR_7 2
+#define UCFG_CHAR_8 3
+
+#define UINFO_TX_FIFO_EMPTY BIT(3)
+#define UINFO_TX_FIFO_FULL BIT(2)
+#define UINFO_RX_FIFO_EMPTY BIT(1)
+#define UINFO_RX_FIFO_FULL BIT(0)
+
+#define UINT_RX_NON_EMPTY BIT(6)
+#define UINT_TX_EMPTY BIT(5)
+#define UINT_RX_UNDERRUN BIT(4)
+#define UINT_RX_OVERRUN BIT(3)
+#define UINT_RX_PARITY_ERR BIT(2)
+#define UINT_RX_STOP_ERR BIT(1)
+#define UINT_TX_OVERRUN BIT(0)
+#define UINT_MASK_ALL 0x7F
+
+struct ca_uart_priv {
+ void __iomem *base;
+};
+
+int ca_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+ unsigned int uart_ctrl, baud, sample;
+
+ baud = CORTINA_UART_CLOCK / baudrate;
+
+ uart_ctrl = readl(priv->base + UCFG);
+ uart_ctrl &= ~UCFG_BAUD_COUNT_MASK;
+ uart_ctrl |= UCFG_BAUD_COUNT(baud);
+ writel(uart_ctrl, priv->base + UCFG);
+
+ sample = baud / 2;
+ sample = (sample < 7) ? 7 : sample;
+ writel(sample, priv->base + URX_SAMPLE);
+
+ return 0;
+}
+
+static int ca_serial_getc(struct udevice *dev)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+ int ch;
+
+ ch = readl(priv->base + URX_DATA) & 0xFF;
+
+ return (int)ch;
+}
+
+static int ca_serial_putc(struct udevice *dev, const char ch)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+ unsigned int status;
+
+ /* Retry if TX FIFO full */
+ status = readl(priv->base + UINFO);
+ if (status & UINFO_TX_FIFO_FULL)
+ return -EAGAIN;
+
+ writel(ch, priv->base + UTX_DATA);
+
+ return 0;
+}
+
+static int ca_serial_pending(struct udevice *dev, bool input)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+ unsigned int status;
+
+ status = readl(priv->base + UINFO);
+
+ if (input)
+ return (status & UINFO_RX_FIFO_EMPTY) ? 0 : 1;
+ else
+ return (status & UINFO_TX_FIFO_FULL) ? 1 : 0;
+}
+
+static int ca_serial_probe(struct udevice *dev)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+ u32 uart_ctrl;
+
+ /* Set data, parity and stop bits */
+ uart_ctrl = UCFG_EN | UCFG_TX_EN | UCFG_RX_EN | UCFG_CHAR_8;
+ writel(uart_ctrl, priv->base + UCFG);
+
+ return 0;
+}
+
+static int ca_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ca_uart_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_remap_addr_index(dev, 0);
+ if (!priv->base)
+ return -ENOENT;
+
+ return 0;
+}
+
+static const struct dm_serial_ops ca_serial_ops = {
+ .putc = ca_serial_putc,
+ .pending = ca_serial_pending,
+ .getc = ca_serial_getc,
+ .setbrg = ca_serial_setbrg,
+};
+
+static const struct udevice_id ca_serial_ids[] = {
+ {.compatible = "cortina,ca-uart"},
+ {}
+};
+
+U_BOOT_DRIVER(serial_cortina) = {
+ .name = "serial_cortina",
+ .id = UCLASS_SERIAL,
+ .of_match = ca_serial_ids,
+ .ofdata_to_platdata = ca_serial_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct ca_uart_priv),
+ .probe = ca_serial_probe,
+ .ops = &ca_serial_ops
+};
--
2.7.4
