On Mon, Feb 3, 2020 at 6:38 PM Wolfgang Wallner <wolfgang.wall...@br-automation.com> wrote: > > Fix the following in intel_gpio_get_value(): > > * The value of the register is contained in the variable 'reg', not in > 'mode'. The variable 'mode' contains only the configuration whether > the gpio is currently an input or an output. > > * The correct bitmasks for the input and output value are > PAD_CFG0_RX_STATE and PAD_CFG0_TX_STATE. > Use them instead of the currently used PAD_CFG0_RX_STATE_BIT and > PAD_CFG0_TX_STATE_BIT. > > Signed-off-by: Wolfgang Wallner <wolfgang.wall...@br-automation.com> > Reviewed-by: Simon Glass <s...@chromium.org> > Reviewed-by: Bin Meng <bmeng...@gmail.com> > > --- > > Changes in v2: None > > drivers/gpio/intel_gpio.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) >
applied to u-boot-x86, thanks!