Hi, On Thu, Feb 6, 2020 at 11:07 AM JH <jupiter....@gmail.com> wrote:
> Thanks Gabriele and Andy, > > On 2/6/20, Gabriele Zampieri <gabbla.mal...@gmail.com> wrote: > > Hi JH, > > > > have you tried what we suggested you in your last thread? More > specifically > > adding your defconfig and tweaking it through menuconfig. and then > specify > > the UBOOT_MACHINE. > > Yes, as I posted in another thread, the MTD, UBI are all set in my > Linux kernel defconfig, I have also added UBOOT_CONFIG = "nand" in my > layer machine config. > What I missed is u-boot overlay, as you and Andy alluded. I added > UBOOT_CONFIG[nand] += "mx6ull_14x14_evk_nand_config", but strange > enough, that mx6ull_14x14_evk_nand_config, did not set CONFIG_CMD_UBI > in its config. > Sorry, I never tried that approach. > > I think I need to add an appended recipes-bsp to my layer just like I > added the recipes-kernel to my layer to overwrite kernel defconfig, I > need to overwrite u-boot defconfig. > > In kernel, to overwrite defconfig, I run bitbake -c menuconfig > virtual/kernel, how can I generate u-boot defconfig, to run bitbake -c > menuconfig u-boot? > As far as I know uboot (usually virtual/bootloader) does not have a task to run menuconfig directly from bitbake. I usually have a local clone of uboot and I simply run `make [...] menuconfig|savedefconfig` , then I create a patch to add my defconfig (custom_defconfig) to configs/ and specify UBOOT_MACHINE = "custom_defconfig" Thank you. > > Kind regards, > > - jh > Gabriele
