On Mon, Feb 03, 2020 at 08:39:22PM +0100, Stefan Bosch wrote: > This patch adds support for SAMSUNG's/NEXELL's ARM Cortex-A9 based > S5P4418 SoC, especially FriendlyARM's NanoPi2 and NanoPC-T2 boards. > It is based on the following FriendlyARM's U-Boot version: > https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01. > > The added mach-nexell also supports the S5P6818 SoC which is a > follow-up of the S5P4418. > > Main changes in relation to nanopi2-v2016.01: > - Cosmetic changes due to patman warnings/errors. > - MMC and Video drivers changed to DM. > - Configs reworked (e.g. "CONFIG_..." moved from s5p4418_nanopi2.h > to s5p4418_nanopi2_defconfig) > - SPL related files are not included. > - MACH_TYPE_S5P4418 is not defined/used anymore. > - arch/arm/mach-nexell/include/mach/boot0.h added to generate the NSIH > (Nexell System Information Header), substitudes tools/nexell. > - board/s5p4418/ renamed to board/friendlyarm/ > - Only the NanoPi2 and NanoPC-T2 boards are supported yet because I > do only have the NanoPC-T2 board to test the code (this board uses > the NanoPi2 code). > > > Stefan Bosch (10): > arm: add mach-nexell (header files) > arm: add mach-nexell (all files except header files) > i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm) > video: add nexell video driver (soc: displaytop) > video: add nexell video driver (soc: mlc, mipi) > video: add nexell video driver (soc: lvds, hdmi) > video: add nexell video driver (soc: dpc, makefile) > video: add nexell video driver (display/video driver) > arm: add support for SoC s5p4418 (cpu) / nanopi2 board > arm: add (default) config for nanopi2 board
In general: - Make sure everything is checkpatch clean (or when not, explainable). - Don't include unused (by the end of the series at least) code. - Don't include both SPDX tags and then the whole license boilerplate. - Do make sure that there's nothing in the config.h file that should be in a _defconfig file at this point. Thanks! -- Tom
signature.asc
Description: PGP signature