BOOT command currently access spi-nor flash memory directly. As per spi-mem
framework, flash memory access via absolute addresses is no more possible.
Use flash APIs to access memory instead of directly using it.
Signed-off-by: Kuldeep Singh <kuldeep.si...@nxp.com>
---
v2:
-Rebase to top
-Reword commit message
include/configs/ls2080ardb.h | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 7a8168b..eae753d 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -505,9 +505,11 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_TFABOOT
#define QSPI_NOR_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x206C0000; " \
+ "&& sf read 0x806c0000 0x6c0000 0x40000 " \
+ "&& esbc_validate 0x806C0000; " \
"env exists mcinitcmd && " \
- "fsl_mc lazyapply dpl 0x20d00000; " \
+ "sf read 0x80d00000 0xd00000 0x100000; " \
+ "fsl_mc lazyapply dpl 0x80d00000; " \
"run distro_bootcmd;run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
@@ -535,9 +537,11 @@ unsigned long get_board_sys_clk(void);
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
- "&& esbc_validate 0x206C0000; " \
+ "&& sf read 0x806c0000 0x6c0000 0x40000 " \
+ "&& esbc_validate 0x806C0000; " \
"env exists mcinitcmd && " \
- "fsl_mc lazyapply dpl 0x20d00000; " \
+ "sf read 0x80d00000 0xd00000 0x100000 && " \
+ "fsl_mc lazyapply dpl 0x80d00000; " \
"run distro_bootcmd;run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
#elif defined(CONFIG_SD_BOOT)
--
2.7.4
