On 13/02/2020 12:49, Lokesh Vutla wrote:
On 13/02/20 3:04 PM, Tero Kristo wrote:
Main domain ESM support is needed to configure main domain watchdogs
to generate ESM pin events by default. On J7 processor board these
propagate to the PMIC to generate a reset when watchdog expires.
Signed-off-by: Tero Kristo <t-kri...@ti.com>
---
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 4 ++++
arch/arm/dts/k3-j721e-main.dtsi | 6 ++++++
arch/arm/dts/k3-j721e.dtsi | 1 +
3 files changed, 11 insertions(+)
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index a3a8193216..158598f5a7 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -349,3 +349,7 @@
&exp2 {
u-boot,dm-spl;
};
+
+&main_esm {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi
index 45ac98c47e..ef4282f608 100644
--- a/arch/arm/dts/k3-j721e-main.dtsi
+++ b/arch/arm/dts/k3-j721e-main.dtsi
@@ -532,4 +532,10 @@
clocks = <&k3_clks 193 0>;
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
};
+
+ main_esm: esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };
This might never be defined in kernel dts. So it will be a problem when syncing
kernel dts. Can you move this to r5 dts?
Yeah, I can't see this ever going to be defined in kernel dts.
I can move it to r5 file.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki