On Mon, Feb 17, 2020 at 2:27 PM Fabio Estevam <[email protected]> wrote:
> I also had to apply the following change in order to boot a i.MX8QXP MEK
> board:
>
> --- a/arch/arm/mach-imx/imx8/fdt.c
> +++ b/arch/arm/mach-imx/imx8/fdt.c
> @@ -280,6 +280,8 @@ int ft_system_setup(void *blob, bd_t *bd)
> {
> int ret;
>
> + return 0;
> +
> update_fdt_with_owned_resources(blob);
>
> if (is_imx8qm()) {
>
> With your patch and this change a 4.14.98 NXP kernel can boot, but not
> a 4.19.35 NXP nor a mainline kernel.
>
> Tested-by: Fabio Estevam <[email protected]>
Correction: the above change is not needed now.
I saw an issue with the command line and I sent a fix.
This patch plus the one that fixes the command line are enough to get
i.MX8QXP MEK board booting a mainline kernel.
Thanks
