[PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL

[Giulio Benetti]

mxsfb needs PLL5 as source, so let's setup it and set it as source for
mxsfb(lcdif).

Signed-off-by: Giulio Benetti <giulio.bene...@benettiengineering.com>
---
 drivers/clk/imx/clk-imxrt1050.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
index e33d426363..2819ffb9ac 100644
--- a/drivers/clk/imx/clk-imxrt1050.c
+++ b/drivers/clk/imx/clk-imxrt1050.c
@@ -238,9 +238,9 @@ static int imxrt1050_clk_probe(struct udevice *dev)
        clk_dm(IMXRT1050_CLK_LCDIF,
               imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70, 28));
 
-#ifdef CONFIG_SPL_BUILD
        struct clk *clk, *clk1;
 
+#ifdef CONFIG_SPL_BUILD
        /* bypass pll1 before setting its rate */
        clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
        clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
@@ -271,7 +271,18 @@ static int imxrt1050_clk_probe(struct udevice *dev)
 
        clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1);
        clk_set_parent(clk1, clk);
+#else
+       /* Set PLL5 for LCDIF to its default 650Mhz */
+       clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk);
+       clk_enable(clk);
+       clk_set_rate(clk, 650000000UL);
+
+       clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1);
+       clk_set_parent(clk1, clk);
 
+       /* Configure PLL5 as LCDIF source */
+       clk_get_by_id(IMXRT1050_CLK_LCDIF_SEL, &clk1);
+       clk_set_parent(clk1, clk);
 #endif
 
        return 0;
-- 
2.20.1