On Wed, 11 Mar 2020 23:34:13 +0530 Amit Singh Tomar <[email protected]> wrote:
Hi, > Synchronize device tree bindings with v5.5-rc6 tag with commit id > "b3a987b0264d". > > Also, it removes older clock binding defined for S900 and adapts > clock driver to cater to new bindings. > > Signed-off-by: Amit Singh Tomar <[email protected]> This patch itself looks alright now, but you need to pull in the UART patch before that, as the compatible string changed. Also it would be good to synchronise the bubblegum .dts file as well, but that's not a showstopper at this point. Reviewed-by: Andre Przywara <[email protected]> > --- > Changes since v4: > * This patch is re-ordered, moved from 07/11 to 03/11. > * Used the commit-id(12 chars long) in commit message. > Changes since v3: > * Added Reviewed-by: tag. > Changes since v2: > * Newly added patch, not there in v2/v1. > --- > arch/arm/dts/s900.dtsi | 322 > +++++++++++++++++++++++-- > drivers/clk/owl/clk_s900.c | 6 +- > include/dt-bindings/clock/actions,s900-cmu.h | 129 ++++++++++ > include/dt-bindings/clock/s900_cmu.h | 77 ------ > include/dt-bindings/reset/actions,s900-reset.h | 65 +++++ > 5 files changed, 498 insertions(+), 101 deletions(-) > create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h > delete mode 100644 include/dt-bindings/clock/s900_cmu.h > create mode 100644 include/dt-bindings/reset/actions,s900-reset.h > > diff --git a/arch/arm/dts/s900.dtsi b/arch/arm/dts/s900.dtsi > index 2bbb30a..eb35cf7 100644 > --- a/arch/arm/dts/s900.dtsi > +++ b/arch/arm/dts/s900.dtsi > @@ -1,17 +1,94 @@ > -// SPDX-License-Identifier: GPL-2.0+ > -// > -// Device Tree Source for Actions Semi S900 SoC > -// > -// Copyright (C) 2015 Actions Semi Co., Ltd. > -// Copyright (C) 2018 Manivannan Sadhasivam > <[email protected]> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Andreas Färber > + */ > > -/dts-v1/; > -#include <dt-bindings/clock/s900_cmu.h> > +#include <dt-bindings/clock/actions,s900-cmu.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/reset/actions,s900-reset.h> > > / { > compatible = "actions,s900"; > - #address-cells = <0x2>; > - #size-cells = <0x2>; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + }; > + > + cpu1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + }; > + > + cpu2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x2>; > + enable-method = "psci"; > + }; > + > + cpu3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x3>; > + enable-method = "psci"; > + }; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + secmon@1f000000 { > + reg = <0x0 0x1f000000 0x0 0x1000000>; > + no-map; > + }; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + arm-pmu { > + compatible = "arm,cortex-a53-pmu"; > + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + hosc: hosc { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + #clock-cells = <0>; > + }; > > losc: losc { > compatible = "fixed-clock"; > @@ -26,28 +103,231 @@ > }; > > soc { > - u-boot,dm-pre-reloc; > compatible = "simple-bus"; > - #address-cells = <0x2>; > - #size-cells = <0x2>; > + #address-cells = <2>; > + #size-cells = <2>; > ranges; > > + gic: interrupt-controller@e00f1000 { > + compatible = "arm,gic-400"; > + reg = <0x0 0xe00f1000 0x0 0x1000>, > + <0x0 0xe00f2000 0x0 0x2000>, > + <0x0 0xe00f4000 0x0 0x2000>, > + <0x0 0xe00f6000 0x0 0x2000>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | > IRQ_TYPE_LEVEL_LOW)>; > + interrupt-controller; > + #interrupt-cells = <3>; > + }; > + > + uart0: serial@e0120000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe0120000 0x0 0x2000>; > + clocks = <&cmu CLK_UART0>; > + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart1: serial@e0122000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe0122000 0x0 0x2000>; > + clocks = <&cmu CLK_UART1>; > + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart2: serial@e0124000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe0124000 0x0 0x2000>; > + clocks = <&cmu CLK_UART2>; > + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart3: serial@e0126000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe0126000 0x0 0x2000>; > + clocks = <&cmu CLK_UART3>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + uart4: serial@e0128000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe0128000 0x0 0x2000>; > + clocks = <&cmu CLK_UART4>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > uart5: serial@e012a000 { > - u-boot,dm-pre-reloc; > - compatible = "actions,s900-serial"; > - reg = <0x0 0xe012a000 0x0 0x1000>; > - clocks = <&cmu CLOCK_UART5>; > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe012a000 0x0 0x2000>; > + clocks = <&cmu CLK_UART5>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > > + uart6: serial@e012c000 { > + compatible = "actions,s900-uart", "actions,owl-uart"; > + reg = <0x0 0xe012c000 0x0 0x2000>; > + clocks = <&cmu CLK_UART6>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + sps: power-controller@e012e000 { > + compatible = "actions,s900-sps"; > + reg = <0x0 0xe012e000 0x0 0x2000>; > + #power-domain-cells = <1>; > + }; > + > cmu: clock-controller@e0160000 { > - u-boot,dm-pre-reloc; > compatible = "actions,s900-cmu"; > reg = <0x0 0xe0160000 0x0 0x1000>; > - clocks = <&losc>, <&diff24M>; > - clock-names = "losc", "diff24M"; > + clocks = <&hosc>, <&losc>; > #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + i2c0: i2c@e0170000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0170000 0 0x1000>; > + clocks = <&cmu CLK_I2C0>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@e0172000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0172000 0 0x1000>; > + clocks = <&cmu CLK_I2C1>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@e0174000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0174000 0 0x1000>; > + clocks = <&cmu CLK_I2C2>; > + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@e0176000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0176000 0 0x1000>; > + clocks = <&cmu CLK_I2C3>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@e0178000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0178000 0 0x1000>; > + clocks = <&cmu CLK_I2C4>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c5: i2c@e017a000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe017a000 0 0x1000>; > + clocks = <&cmu CLK_I2C5>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + pinctrl: pinctrl@e01b0000 { > + compatible = "actions,s900-pinctrl"; > + reg = <0x0 0xe01b0000 0x0 0x1000>; > + clocks = <&cmu CLK_GPIO>; > + gpio-controller; > + gpio-ranges = <&pinctrl 0 0 146>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + timer: timer@e0228000 { > + compatible = "actions,s900-timer"; > + reg = <0x0 0xe0228000 0x0 0x8000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "timer1"; > + }; > + > + dma: dma-controller@e0260000 { > + compatible = "actions,s900-dma"; > + reg = <0x0 0xe0260000 0x0 0x1000>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + dma-channels = <12>; > + dma-requests = <46>; > + clocks = <&cmu CLK_DMAC>; > + }; > + > + mmc0: mmc@e0330000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0330000 0x0 0x4000>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD0>; > + resets = <&cmu RESET_SD0>; > + dmas = <&dma 2>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc1: mmc@e0334000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0334000 0x0 0x4000>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD1>; > + resets = <&cmu RESET_SD1>; > + dmas = <&dma 3>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc2: mmc@e0338000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0338000 0x0 0x4000>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD2>; > + resets = <&cmu RESET_SD2>; > + dmas = <&dma 4>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc3: mmc@e033c000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe033c000 0x0 0x4000>; > + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD3>; > + resets = <&cmu RESET_SD3>; > + dmas = <&dma 46>; > + dma-names = "mmc"; > + status = "disabled"; > }; > }; > }; > - > diff --git a/drivers/clk/owl/clk_s900.c b/drivers/clk/owl/clk_s900.c > index a7c15d2..d60f199 100644 > --- a/drivers/clk/owl/clk_s900.c > +++ b/drivers/clk/owl/clk_s900.c > @@ -12,7 +12,7 @@ > #include <asm/arch-owl/regs_s900.h> > #include <asm/io.h> > > -#include <dt-bindings/clock/s900_cmu.h> > +#include <dt-bindings/clock/actions,s900-cmu.h> > > void owl_clk_init(struct owl_clk_priv *priv) > { > @@ -78,7 +78,7 @@ int owl_clk_enable(struct clk *clk) > struct owl_clk_priv *priv = dev_get_priv(clk->dev); > > switch (clk->id) { > - case CLOCK_UART5: > + case CLK_UART5: > owl_uart_clk_enable(priv); > break; > default: > @@ -93,7 +93,7 @@ int owl_clk_disable(struct clk *clk) > struct owl_clk_priv *priv = dev_get_priv(clk->dev); > > switch (clk->id) { > - case CLOCK_UART5: > + case CLK_UART5: > owl_uart_clk_disable(priv); > break; > default: > diff --git a/include/dt-bindings/clock/actions,s900-cmu.h > b/include/dt-bindings/clock/actions,s900-cmu.h > new file mode 100644 > index 0000000..7c12515 > --- /dev/null > +++ b/include/dt-bindings/clock/actions,s900-cmu.h > @@ -0,0 +1,129 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +// > +// Device Tree binding constants for Actions Semi S900 Clock Management Unit > +// > +// Copyright (c) 2014 Actions Semi Inc. > +// Copyright (c) 2018 Linaro Ltd. > + > +#ifndef __DT_BINDINGS_CLOCK_S900_CMU_H > +#define __DT_BINDINGS_CLOCK_S900_CMU_H > + > +#define CLK_NONE 0 > + > +/* fixed rate clocks */ > +#define CLK_LOSC 1 > +#define CLK_HOSC 2 > + > +/* pll clocks */ > +#define CLK_CORE_PLL 3 > +#define CLK_DEV_PLL 4 > +#define CLK_DDR_PLL 5 > +#define CLK_NAND_PLL 6 > +#define CLK_DISPLAY_PLL 7 > +#define CLK_DSI_PLL 8 > +#define CLK_ASSIST_PLL 9 > +#define CLK_AUDIO_PLL 10 > + > +/* system clock */ > +#define CLK_CPU 15 > +#define CLK_DEV 16 > +#define CLK_NOC 17 > +#define CLK_NOC_MUX 18 > +#define CLK_NOC_DIV 19 > +#define CLK_AHB 20 > +#define CLK_APB 21 > +#define CLK_DMAC 22 > + > +/* peripheral device clock */ > +#define CLK_GPIO 23 > + > +#define CLK_BISP 24 > +#define CLK_CSI0 25 > +#define CLK_CSI1 26 > + > +#define CLK_DE0 27 > +#define CLK_DE1 28 > +#define CLK_DE2 29 > +#define CLK_DE3 30 > +#define CLK_DSI 32 > + > +#define CLK_GPU 33 > +#define CLK_GPU_CORE 34 > +#define CLK_GPU_MEM 35 > +#define CLK_GPU_SYS 36 > + > +#define CLK_HDE 37 > +#define CLK_I2C0 38 > +#define CLK_I2C1 39 > +#define CLK_I2C2 40 > +#define CLK_I2C3 41 > +#define CLK_I2C4 42 > +#define CLK_I2C5 43 > +#define CLK_I2SRX 44 > +#define CLK_I2STX 45 > +#define CLK_IMX 46 > +#define CLK_LCD 47 > +#define CLK_NAND0 48 > +#define CLK_NAND1 49 > +#define CLK_PWM0 50 > +#define CLK_PWM1 51 > +#define CLK_PWM2 52 > +#define CLK_PWM3 53 > +#define CLK_PWM4 54 > +#define CLK_PWM5 55 > +#define CLK_SD0 56 > +#define CLK_SD1 57 > +#define CLK_SD2 58 > +#define CLK_SD3 59 > +#define CLK_SENSOR 60 > +#define CLK_SPEED_SENSOR 61 > +#define CLK_SPI0 62 > +#define CLK_SPI1 63 > +#define CLK_SPI2 64 > +#define CLK_SPI3 65 > +#define CLK_THERMAL_SENSOR 66 > +#define CLK_UART0 67 > +#define CLK_UART1 68 > +#define CLK_UART2 69 > +#define CLK_UART3 70 > +#define CLK_UART4 71 > +#define CLK_UART5 72 > +#define CLK_UART6 73 > +#define CLK_VCE 74 > +#define CLK_VDE 75 > + > +#define CLK_USB3_480MPLL0 76 > +#define CLK_USB3_480MPHY0 77 > +#define CLK_USB3_5GPHY 78 > +#define CLK_USB3_CCE 79 > +#define CLK_USB3_MAC 80 > + > +#define CLK_TIMER 83 > + > +#define CLK_HDMI_AUDIO 84 > + > +#define CLK_24M 85 > + > +#define CLK_EDP 86 > + > +#define CLK_24M_EDP 87 > +#define CLK_EDP_PLL 88 > +#define CLK_EDP_LINK 89 > + > +#define CLK_USB2H0_PLLEN 90 > +#define CLK_USB2H0_PHY 91 > +#define CLK_USB2H0_CCE 92 > +#define CLK_USB2H1_PLLEN 93 > +#define CLK_USB2H1_PHY 94 > +#define CLK_USB2H1_CCE 95 > + > +#define CLK_DDR0 96 > +#define CLK_DDR1 97 > +#define CLK_DMM 98 > + > +#define CLK_ETH_MAC 99 > +#define CLK_RMII_REF 100 > + > +#define CLK_NR_CLKS (CLK_RMII_REF + 1) > + > +#endif /* __DT_BINDINGS_CLOCK_S900_CMU_H */ > diff --git a/include/dt-bindings/clock/s900_cmu.h > b/include/dt-bindings/clock/s900_cmu.h > deleted file mode 100644 > index 2685a6d..0000000 > --- a/include/dt-bindings/clock/s900_cmu.h > +++ /dev/null > @@ -1,77 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * Copyright (C) 2015 Actions Semi Co., Ltd. > - * Copyright (C) 2018 Manivannan Sadhasivam > <[email protected]> > - * > - */ > - > -#ifndef _DT_BINDINGS_CLOCK_S900_CMU_H_ > -#define _DT_BINDINGS_CLOCK_S900_CMU_H_ > - > -/* Module Clock ID */ > -#define CLOCK_DDRCH1 0 > -#define CLOCK_DMAC 1 > -#define CLOCK_DDRCH0 2 > -#define CLOCK_BROM 3 > -#define CLOCK_NANDC0 4 > -#define CLOCK_SD0 5 > -#define CLOCK_SD1 6 > -#define CLOCK_SD2 7 > -#define CLOCK_DE 8 > -#define CLOCK_LVDS 9 > -#define CLOCK_EDP 10 > -#define CLOCK_NANDC1 11 > -#define CLOCK_DSI 12 > -#define CLOCK_CSI0 13 > -#define CLOCK_BISP 14 > -#define CLOCK_CSI1 15 > -#define CLOCK_SD3 16 > -#define CLOCK_I2C4 17 > -#define CLOCK_GPIO 18 > -#define CLOCK_DMM 19 > -#define CLOCK_I2STX 20 > -#define CLOCK_I2SRX 21 > -#define CLOCK_HDMIA 22 > -#define CLOCK_SPDIF 23 > -#define CLOCK_PCM0 24 > -#define CLOCK_VDE 25 > -#define CLOCK_VCE 26 > -#define CLOCK_HDE 27 > -#define CLOCK_SHARESRAM 28 > -#define CLOCK_CMU_DDR1 29 > -#define CLOCK_GPU3D 30 > -#define CLOCK_CMUDDR0 31 > -#define CLOCK_SPEED 32 > -#define CLOCK_I2C5 33 > -#define CLOCK_THERMAL 34 > -#define CLOCK_HDMI 35 > -#define CLOCK_PWM4 36 > -#define CLOCK_PWM5 37 > -#define CLOCK_UART0 38 > -#define CLOCK_UART1 39 > -#define CLOCK_UART2 40 > -#define CLOCK_IRC 41 > -#define CLOCK_SPI0 42 > -#define CLOCK_SPI1 43 > -#define CLOCK_SPI2 44 > -#define CLOCK_SPI3 45 > -#define CLOCK_I2C0 46 > -#define CLOCK_I2C1 47 > -#define CLOCK_PCM1 48 > -#define CLOCK_IMX 49 > -#define CLOCK_UART6 50 > -#define CLOCK_UART3 51 > -#define CLOCK_UART4 52 > -#define CLOCK_UART5 53 > -#define CLOCK_ETHERNET 54 > -#define CLOCK_PWM0 55 > -#define CLOCK_PWM1 56 > -#define CLOCK_PWM2 57 > -#define CLOCK_PWM3 58 > -#define CLOCK_TIMER 59 > -#define CLOCK_SE 60 > -#define CLOCK_HDCP2TX 61 > -#define CLOCK_I2C2 62 > -#define CLOCK_I2C3 63 > - > -#endif > diff --git a/include/dt-bindings/reset/actions,s900-reset.h > b/include/dt-bindings/reset/actions,s900-reset.h > new file mode 100644 > index 0000000..42c19d0 > --- /dev/null > +++ b/include/dt-bindings/reset/actions,s900-reset.h > @@ -0,0 +1,65 @@ > +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) > +// > +// Device Tree binding constants for Actions Semi S900 Reset Management Unit > +// > +// Copyright (c) 2018 Linaro Ltd. > + > +#ifndef __DT_BINDINGS_ACTIONS_S900_RESET_H > +#define __DT_BINDINGS_ACTIONS_S900_RESET_H > + > +#define RESET_CHIPID 0 > +#define RESET_CPU_SCNT 1 > +#define RESET_SRAMI 2 > +#define RESET_DDR_CTL_PHY 3 > +#define RESET_DMAC 4 > +#define RESET_GPIO 5 > +#define RESET_BISP_AXI 6 > +#define RESET_CSI0 7 > +#define RESET_CSI1 8 > +#define RESET_DE 9 > +#define RESET_DSI 10 > +#define RESET_GPU3D_PA 11 > +#define RESET_GPU3D_PB 12 > +#define RESET_HDE 13 > +#define RESET_I2C0 14 > +#define RESET_I2C1 15 > +#define RESET_I2C2 16 > +#define RESET_I2C3 17 > +#define RESET_I2C4 18 > +#define RESET_I2C5 19 > +#define RESET_IMX 20 > +#define RESET_NANDC0 21 > +#define RESET_NANDC1 22 > +#define RESET_SD0 23 > +#define RESET_SD1 24 > +#define RESET_SD2 25 > +#define RESET_SD3 26 > +#define RESET_SPI0 27 > +#define RESET_SPI1 28 > +#define RESET_SPI2 29 > +#define RESET_SPI3 30 > +#define RESET_UART0 31 > +#define RESET_UART1 32 > +#define RESET_UART2 33 > +#define RESET_UART3 34 > +#define RESET_UART4 35 > +#define RESET_UART5 36 > +#define RESET_UART6 37 > +#define RESET_HDMI 38 > +#define RESET_LVDS 39 > +#define RESET_EDP 40 > +#define RESET_USB2HUB 41 > +#define RESET_USB2HSIC 42 > +#define RESET_USB3 43 > +#define RESET_PCM1 44 > +#define RESET_AUDIO 45 > +#define RESET_PCM0 46 > +#define RESET_SE 47 > +#define RESET_GIC 48 > +#define RESET_DDR_CTL_PHY_AXI 49 > +#define RESET_CMU_DDR 50 > +#define RESET_DMM 51 > +#define RESET_HDCP2TX 52 > +#define RESET_ETHERNET 53 > + > +#endif /* __DT_BINDINGS_ACTIONS_S900_RESET_H */
