Add the External MDIO device nodes found in the WRIOP global memory region. This is needed for management of external PHYs.
Signed-off-by: Ioana Ciornei <[email protected]> --- arch/arm/dts/fsl-lx2160a.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi index 42ce4379eceb..15f18bc4a5f7 100644 --- a/arch/arm/dts/fsl-lx2160a.dtsi +++ b/arch/arm/dts/fsl-lx2160a.dtsi @@ -363,4 +363,24 @@ bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; }; + + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ + emdio1: mdio@8b96000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */ + emdio2: mdio@8b97000 { + compatible = "fsl,ls-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; -- 2.17.1
