On 3/13/2020 12:04 PM, Vladimir Oltean wrote:
From: Vladimir Oltean <[email protected]>The pci-host-ecam-generic code assumes that the ECAM is the first PCI bus in the system to be probed. Therefore, the system-wide bus number allocated by U-Boot in sequence for it is going to be zero, which corresponds to the memory-mapped config spaces found within it. Reuse the logic from other PCI bus drivers, and assume that U-Boot will allocate bus numbers in sequence for all buses within the current ECAM. So the base number of the bus needs to be subtracted when indexing the correct config space. Fixes: 3675cb044e68 ("PCI: Add driver for a 'pci-host-ecam-generic' host controller") Signed-off-by: Vladimir Oltean <[email protected]> --- drivers/pci/pcie_ecam_generic.c | 36 +++++++++++++++++++++++++++++---- 1 file changed, 32 insertions(+), 4 deletions(-)
Reviewed-by: Alex Marginean <[email protected]>
