Kever Yang <[email protected]> writes:
The image is usually stored in block device like emmc, SD card, make the
offset of image data aligned to block(512 byte) can avoid data copy
during boot process.
eg. SPL boot from FIT image with external data:
- SPL read the first block of FIT image, and then parse the header;
- SPL read image data separately;
- The first image offset is the base_offset which is the header size;
- The second image offset is just after the first image;
- If the offset of imge does not aligned, SPL will do memcpy;
The header size is a ramdon number, which is very possible not aligned, so
add '-B' to specify the align size in hex for better performance.
example usage:
./tools/mkimage -E -f u-boot.its -B 200 u-boot.itb
Signed-off-by: Kever Yang <[email protected]>
---
Changes in v2:
- use '-B' to take a argument as a align block lenth;
- address commens from Heinrich, Rasmus, Tom, Punit;
doc/uImage.FIT/source_file_format.txt | 5 +++++
tools/fit_image.c | 26 ++++++++++++++++++++------
tools/imagetool.h | 1 +
tools/mkimage.c | 14 ++++++++++++--
4 files changed, 38 insertions(+), 8 deletions(-)
[...]
diff --git a/tools/fit_image.c b/tools/fit_image.c
index 6aa4b1c733..6fa2ce328a 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -23,6 +23,11 @@
static image_header_t header;
+static int get_aligned_size(int size, int aligned_size)
+{
+ return ((size + aligned_size - 1) & ~(aligned_size - 1));
+}
+
Instead of adding another copy of this code (versions of it already
exist in imx8mimage.c, ifwitool.c, aisiamge.c), it would be better to
move the below snippet to imagetool.h.
#define __ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask))
#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a) - 1)
With this, you can drop the version in imx8mimage.c which seems to
introduce an unnecessary multiplication / division.
static int fit_add_file_data(struct image_tool_params *params, size_t
size_inc,
const char *tmpfile)
{
@@ -430,8 +435,11 @@ static int fit_extract_data(struct image_tool_params
*params, const char *fname)
return -EIO;
fit_size = fdt_totalsize(fdt);
- /* Allocate space to hold the image data we will extract */
- buf = malloc(fit_size);
+ /*
+ * Allocate space to hold the image data we will extract,
+ * 4096 byte extral space allocate for image alignment.
+ */
+ buf = malloc(fit_size + 4096);
I might be missing something but shouldn't the extra allocation depend
on -
* block size
* number of data objects in the FIT
if (!buf) {
ret = -ENOMEM;
goto err_munmap;
@@ -471,17 +479,23 @@ static int fit_extract_data(struct image_tool_params
*params, const char *fname)
buf_ptr);
}
fdt_setprop_u32(fdt, node, FIT_DATA_SIZE_PROP, len);
-
- buf_ptr += (len + 3) & ~3;
+ if (params->bl_len > 0)
+ buf_ptr += get_aligned_size(len, params->bl_len);
+ else
+ buf_ptr += get_aligned_size(len, 4);
}
/* Pack the FDT and place the data after it */
fdt_pack(fdt);
+ new_size = fdt_totalsize(fdt);
+ if (params->bl_len > 0)
+ new_size = get_aligned_size(new_size, params->bl_len);
+ else
+ new_size = get_aligned_size(new_size, 4);
This condition gets duplicated here and in the loop above. It would be
better to introduce a variable to track alignment requirement (4 or
bl_len) at the start of the function and use them in both places.
What do you think?
Thanks,
Punit
+ fdt_set_totalsize(fdt, new_size);
debug("Size reduced from %x to %x\n", fit_size, fdt_totalsize(fdt));
debug("External data size %x\n", buf_ptr);
- new_size = fdt_totalsize(fdt);
- new_size = (new_size + 3) & ~3;
munmap(fdt, sbuf.st_size);
if (ftruncate(fd, new_size)) {
diff --git a/tools/imagetool.h b/tools/imagetool.h
index e1c778b0df..fd5e4b246c 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -76,6 +76,7 @@ struct image_tool_params {
bool external_data; /* Store data outside the FIT */
bool quiet; /* Don't output text in normal operation */
unsigned int external_offset; /* Add padding to external data */
+ int bl_len; /* Block length in byte for external data */
const char *engine_id; /* Engine to use for signing */
};
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 5f51d2cc89..584aeff907 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -97,8 +97,9 @@ static void usage(const char *msg)
" -i => input filename for ramdisk file\n");
#ifdef CONFIG_FIT_SIGNATURE
fprintf(stderr,
- "Signing / verified boot options: [-E] [-k keydir] [-K dtb] [ -c
<comment>] [-p addr] [-r] [-N engine]\n"
+ "Signing / verified boot options: [-E] [-B] [-k keydir] [-K dtb] [ -c
<comment>] [-p addr] [-r] [-N engine]\n"
" -E => place data outside of the FIT structure\n"
+ " -B => align FIT structure and header to block\n"
" -k => set directory containing private keys\n"
" -K => write public keys to this .dtb file\n"
" -c => add comment in signature node\n"
@@ -143,7 +144,7 @@ static void process_args(int argc, char **argv)
int opt;
while ((opt = getopt(argc, argv,
- "a:A:b:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qsT:vVx"))
!= -1) {
+
"a:A:b:B:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qsT:vVx")) != -1) {
switch (opt) {
case 'a':
params.addr = strtoull(optarg, &ptr, 16);
@@ -167,6 +168,15 @@ static void process_args(int argc, char **argv)
params.cmdname, optarg);
exit(EXIT_FAILURE);
}
+ break;
+ case 'B':
+ params.bl_len = strtoull(optarg, &ptr, 16);
+ if (*ptr) {
+ fprintf(stderr, "%s: invalid block length %s\n",
+ params.cmdname, optarg);
+ exit(EXIT_FAILURE);
+ }
+
break;
case 'c':
params.comment = optarg;
