>-----Original Message----- >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Kuldeep Singh >Sent: Wednesday, March 18, 2020 11:57 AM >To: Priyanka Jain <priyanka.j...@nxp.com>; u-boot@lists.denx.de >Cc: Kuldeep Singh <kuldeep.si...@nxp.com> >Subject: [Patch v3 2/2] configs: ls2080ardb: Make BOOT command access flash >memory as per spi-mem > >BOOT command currently access spi-nor flash memory directly. As per spi- >mem framework, flash memory access via absolute addresses is no more >possible. >Use flash APIs to access memory instead of directly using it. > >Signed-off-by: Kuldeep Singh <kuldeep.si...@nxp.com> >--- >v3: >-Rebase > >v2: >-Rebase to top >-Reword commit message > > include/configs/ls2080ardb.h | 14 ++++++++++---- > 1 file changed, 10 insertions(+), 4 deletions(-) > >diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index >d36e928..b8e5dd3 100644 >--- a/include/configs/ls2080ardb.h >+++ b/include/configs/ls2080ardb.h >@@ -508,10 +508,13 @@ unsigned long get_board_sys_clk(void); > > #ifdef CONFIG_TFABOOT > #define QSPI_NOR_BOOTCOMMAND > \ >+ "sf probe 0:0; " \ >+ "sf read 0x806c0000 0x6c0000 0x40000; " > \ > "env exists mcinitcmd && env exists secureboot "\ >- "&& esbc_validate 0x206C0000; " > \ >+ "&& esbc_validate 0x806c0000; " > \ >+ "sf read 0x80d00000 0xd00000 0x100000; " \ > "env exists mcinitcmd && " \ >- "fsl_mc lazyapply dpl 0x20d00000; " \ >+ "fsl_mc lazyapply dpl 0x80d00000; " \ > "run distro_bootcmd;run qspi_bootcmd; " > \ > "env exists secureboot && esbc_halt;" > >@@ -538,10 +541,13 @@ unsigned long get_board_sys_clk(void); #ifdef >CONFIG_QSPI_BOOT > /* Try to boot an on-QSPI kernel first, then do normal distro boot */ > #define CONFIG_BOOTCOMMAND > \ >+ "sf probe 0:0; " \ >+ "sf read 0x806c0000 0x6c0000 0x40000; " > \ > "env exists mcinitcmd && env exists secureboot "\ >- "&& esbc_validate 0x206C0000; " > \ >+ "&& esbc_validate 0x806C0000; " > \ >+ "sf read 0x80d00000 0xd00000 0x100000; " \ > "env exists mcinitcmd && " \ >- "fsl_mc lazyapply dpl 0x20d00000; " \ >+ "fsl_mc lazyapply dpl 0x80d00000; " \ > "run distro_bootcmd;run qspi_bootcmd; " > \ > "env exists secureboot && esbc_halt;" > #elif defined(CONFIG_SD_BOOT) >-- >2.7.4 Same comment as previous, please provide testing status for both secure and non-secure boot
Regards Priyanka