-----Original Message----- From: Stephen Warren <swar...@wwwdotorg.org> Sent: Wednesday, March 18, 2020 4:14 PM To: Tom Warren <twar...@nvidia.com> Cc: u-boot@lists.denx.de; Stephen Warren <swar...@nvidia.com>; Thierry Reding <tred...@nvidia.com>; Jonathan Hunter <jonath...@nvidia.com>; tomcwarren3...@gmail.com Subject: Re: [PATCH] t210: pinmux: Remove pinmux/GPIO init from T210 boards
External email: Use caution opening links or attachments On 3/17/20 3:55 PM, twar...@nvidia.com wrote: > From: Tom Warren <twar...@nvidia.com> > > T210 CBoot is now doing the full pinmux and GPIO init, based on the > DTB tables. Remove pinmux/GPIO init tables & code from all T210-based > builds > below: > > p2371-2180 aka TX1 > p2371-0000 > e2220-1170 > p2571 Acked-by: Stephen Warren <swar...@nvidia.com> It may be worth updating the commit description to mention explicitly which L4T release's FW is required when using a U-Boot that has this patch applied. [Tom] I'll do that for v2, thanks. Can we remove the T210 pinmux driver from U-Boot with this patch applied? [Tom] Good idea, I'll look at it. Seems like it should work if I excise arch/arm/mach-tegra/pinmux.c. ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. -----------------------------------------------------------------------------------
