From: Yuantian Tang <andy.t...@nxp.com>
Add sd and emmc bootcmd environments to facilitate
the boot process.
Signed-off-by: Yuantian Tang <andy.t...@nxp.com>
---
v2:
- updated some variable slightly.
include/configs/ls1028aqds.h | 39 ++++++++++++++++++++++++++++-----------
1 file changed, 28 insertions(+), 11 deletions(-)
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index b3c1242..5843274 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -108,6 +108,7 @@
"load_addr=0xa0000000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x90000000\0" \
+ "fdt2_addr_r=0x90010000\0" \
"ramdisk_addr_r=0xa0000000\0" \
"kernel_start=0x1000000\0" \
"kernelheader_start=0x800000\0" \
@@ -148,19 +149,35 @@
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
+ "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+ "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "sd_bootcmd=echo Trying load from SD ...;" \
+ "mmc dev 0; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
"env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmcinfo; mmc dev 1; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
+ "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "emmc_bootcmd=echo Trying load from EMMC ..;" \
+ "mmc dev 1; mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
"env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0"
+ "bootm $load_addr#$board\0" \
+ "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
+ "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0"
+
#endif
#endif /* __LS1028A_QDS_H */
--
2.9.5
