The patch removes an endless loop in the usb_eth_send if the tx_complete is not called before going in the loop. The driver interrupt routine is called allowing the driver to check if the TX is completed.
Signed-off-by: Stefano Babic <[email protected]> --- drivers/usb/gadget/ether.c | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-) diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 1481d76..9eb43d7 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1808,6 +1808,8 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le struct usb_request *req = NULL; struct eth_dev *dev = &l_ethdev; + unsigned long ts; + unsigned long timeout = USB_CONNECT_TIMEOUT; dprintf("%s:...\n",__func__); req = dev->tx_req; @@ -1837,9 +1839,15 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le if (!retval) dprintf("%s: packet queued\n",__func__); + ts = get_timer(0); + packet_sent=0; while(!packet_sent) { - packet_sent=0; + if (get_timer(ts) > timeout) { + printf ("timeout sending packets to usb ethernet\n"); + return -1; + } + usb_gadget_handle_interrupts(); } return 0; -- 1.6.3.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
