>-----Original Message-----
>From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Biwen Li
>Sent: Wednesday, March 18, 2020 5:39 PM
>To: Jagdish Gediya <jagdish.ged...@nxp.com>; Priyanka Jain
><priyanka.j...@nxp.com>; Andy Tang <andy.t...@nxp.com>; Shengzhou Liu
><shengzhou....@nxp.com>
>Cc: Alison Wang <alison.w...@nxp.com>; u-boot@lists.denx.de; Jiafei Pan
><jiafei....@nxp.com>; Biwen Li <biwen...@nxp.com>
>Subject: [PATCH] condfigs: ls1046aqds: support distro boot
>
Typo mistake : configs
>Add support of distro boot for ls1046aqds
>
>Signed-off-by: Biwen Li <biwen...@nxp.com>
>---
> include/configs/ls1046a_common.h | 8 +++++++-
> include/configs/ls1046aqds.h | 20 +++++++++-----------
> 2 files changed, 16 insertions(+), 12 deletions(-)
>
>diff --git a/include/configs/ls1046a_common.h
>b/include/configs/ls1046a_common.h
>index 07570187f5..111bc9a7b9 100644
>--- a/include/configs/ls1046a_common.h
>+++ b/include/configs/ls1046a_common.h
>@@ -227,7 +227,7 @@
> "fdt_high=0xffffffffffffffff\0" \
> "initrd_high=0xffffffffffffffff\0" \
> "fdt_addr=0x64f00000\0" \
>- "kernel_addr=0x65000000\0" \
>+ "kernel_addr=0x61000000\0" \
> "scriptaddr=0x80000000\0" \
> "scripthdraddr=0x80080000\0" \
> "fdtheader_addr_r=0x80100000\0" \
>@@ -274,6 +274,12 @@
> "&& sf read $kernelheader_addr_r $kernelheader_start "
> \
> "$kernelheader_size && esbc_validate
>${kernelheader_addr_r}; " \
> "bootm $load_addr#$board\0" \
>+ "nor_bootcmd=echo Trying load from nor..;" \
>+ "cp.b $kernel_addr $load_addr " \
>+ "$kernel_size; env exists secureboot " \
>+ "&& cp.b $kernelheader_addr $kernelheader_addr_r " \
>+ "$kernelheader_size && esbc_validate
>${kernelheader_addr_r}; " \
>+ "bootm $load_addr#$board\0" \
> "sd_bootcmd=echo Trying load from SD ..;" \
> "mmcinfo; mmc read $load_addr " \
> "$kernel_addr_sd $kernel_size_sd && " \
>diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index
>eea738e602..d5d96c4ed5 100644
>--- a/include/configs/ls1046aqds.h
>+++ b/include/configs/ls1046aqds.h
>@@ -457,19 +457,17 @@ unsigned long get_board_ddr_clk(void);
>
> #undef CONFIG_BOOTCOMMAND
> #ifdef CONFIG_TFABOOT
>-#define QSPI_NOR_BOOTCOMMAND "sf probe && sf read
I don't see updated definition of QSPI_NOR_BOOTCOMMAND?
>$kernel_load " \
>- "e0000 f00000 && bootm
>$kernel_load"
>-#define IFC_NOR_BOOTCOMMAND "cp.b $kernel_start
>$kernel_load " \
>- "$kernel_size && bootm
>$kernel_load"
>-#define SD_BOOTCOMMAND "mmc info; mmc read $kernel_load"
>\
>- "$kernel_addr_sd $kernel_size_sd &&
>bootm $kernel_load"
>+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;
>" \
>+ "env exists secureboot && esbc_halt;;"
>+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "
> \
>+ "env exists secureboot && esbc_halt;;"
> #else
>-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
>-#define CONFIG_BOOTCOMMAND "sf probe && sf read
>$kernel_load " \
>- "e0000 f00000 && bootm
>$kernel_load"
>+#if defined(CONFIG_SD_BOOT)
>+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "
> \
>+ "env exists secureboot && esbc_halt;;"
> #else
>-#define CONFIG_BOOTCOMMAND "cp.b $kernel_start
>$kernel_load " \
>- "$kernel_size && bootm
>$kernel_load"
>+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "
> \
>+ "env exists secureboot && esbc_halt;;"
> #endif
> #endif
>
>--
>2.17.1
Priyanka
