>-----Original Message----- >From: Ioana Ciornei <[email protected]> >Sent: Wednesday, March 18, 2020 8:18 PM >To: Priyanka Jain <[email protected]>; [email protected]; u- >[email protected] >Cc: Florin Laurentiu Chiculita <[email protected]>; Ioana >Ciornei <[email protected]> >Subject: [PATCH v2 04/14] board: ls1088ardb: transition to DM_ETH > >In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for >DPAA2 Ethernet devices. Compile out any unnecessary setup when >CONFIG_DM_ETH is activated. >Also, force the PCI devices to be enumerated at probe time. > >Signed-off-by: Ioana Ciornei <[email protected]> >--- >Changes in v2: > - none > > board/freescale/ls1088a/eth_ls1088ardb.c | 2 ++ > board/freescale/ls1088a/ls1088a.c | 5 +++++ > 2 files changed, 7 insertions(+) > >diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c >b/board/freescale/ls1088a/eth_ls1088ardb.c >index 01f56db0a1bf..f56ce7d9ae8e 100644 >--- a/board/freescale/ls1088a/eth_ls1088ardb.c >+++ b/board/freescale/ls1088a/eth_ls1088ardb.c >@@ -18,6 +18,7 @@ > #include <fsl-mc/fsl_mc.h> > #include <fsl-mc/ldpaa_wriop.h> > >+#ifndef CONFIG_DM_ETH > int board_eth_init(bd_t *bis) > { > #if defined(CONFIG_FSL_MC_ENET) >@@ -95,6 +96,7 @@ int board_eth_init(bd_t *bis) > > return pci_eth_init(bis); > } >+#endif > > #if defined(CONFIG_RESET_PHY_R) > void reset_phy(void) >diff --git a/board/freescale/ls1088a/ls1088a.c >b/board/freescale/ls1088a/ls1088a.c >index 0bd397a0beb6..225e787c7577 100644 >--- a/board/freescale/ls1088a/ls1088a.c >+++ b/board/freescale/ls1088a/ls1088a.c >@@ -801,6 +801,11 @@ int board_init(void) #ifdef CONFIG_FSL_LS_PPA > ppa_init(); > #endif >+ >+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) >+ pci_init(); >+#endif >+ Ioana, Can you please confirm that you have tested e1000 cards to be working fine after this kind of changes.
Tested Priyanka > return 0; > } > >-- >2.17.1
