For the record, I also tested this on a Wandboard Dual RevC1 and it worked there, too.
-derek On Fri, April 17, 2020 10:50 am, Heiko Schocher wrote: > Hello Fabio, > > Am 17.04.2020 um 14:30 schrieb Fabio Estevam: >> Hi Heiko, >> >> On Fri, Apr 17, 2020 at 9:00 AM Derek Atkins <[email protected]> wrote: >>> >>> Hi, >>> Let me know if you want me to test this on my imx6q d1 >> >> Derek confirmed that v2 worked on his imx6q wandboard revD1 and I have >> just submitted v2 to the list. >> >> Hopefully it will also work on your imx6dl wandboard revD1. > > Yes, can confirm this, see log attached. > > Thanks for your efforts! > > bye, > Heiko > > hs@lab-1:tbot-tbot2go [wandboard-devel-messe] $ tbot @argswandboardlab1 > wandboard_ub_check_version > tbot starting ... > ├─Flags: > │ 'lab-1-build' > ├─Calling wandboard_ub_check_version ... > │ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 > [email protected] > │ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/u-boot.bin | grep > --color=never "U-Boot 2" > │ │ ## U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 > +0200) > │ ├─found in image U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 > (Apr 17 2020 - 16:20:27 +0200) > │ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/SPL | grep > --color=never "U-Boot SPL" > │ │ ## U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - > 16:20:27 +0200) > │ ├─found in image U-Boot SPL version U-Boot SPL > 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - > 16:20:27 +0200) > │ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 > [email protected] > │ ├─[lab1] kermit /home/hs/kermrc_wandboard > │ ├─POWERON (wandboard) > │ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -o 3 > │ │ ## Accessing Gembird #0 USB device 021 > │ │ ## Switched outlet 3 on > │ ├─UBOOT (wandboard-uboot) > │ │ <> Connecting to > /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0, > speed 115200 > │ │ <> Escape character: Ctrl-\ (ASCII 28, FS): enabled > │ │ <> Type the escape character followed by C to get back, > │ │ <> or followed by ? to see other options. > │ │ <> ---------------------------------------------------- > │ │ <> > │ │ <> U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - > 16:20:27 +0200) > │ │ <> Trying to boot from MMC1 > │ │ <> > │ │ <> > │ │ <> U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 > +0200) > │ │ <> > │ │ <> CPU: Freescale i.MX6DL rev1.3 at 792 MHz > │ │ <> Reset cause: POR > │ │ <> DRAM: 1 GiB > │ │ <> PMIC: PFUZE100 ID=0x10 > │ │ <> MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0 > │ │ <> Loading Environment from MMC... *** Warning - bad CRC, using > default environment > │ │ <> > │ │ <> No panel detected: default to HDMI > │ │ <> Display: HDMI (1024x768) > │ │ <> In: serial > │ │ <> Out: serial > │ │ <> Err: serial > │ │ <> Board: Wandboard rev D1 > │ │ <> Net: > │ │ <> Warning: ethernet@2188000 using MAC address from ROM > │ │ <> eth0: ethernet@2188000 > │ │ <> Hit any key to stop autoboot: 0 > │ │ <> => > │ ├─found U-Boot SPL version U-Boot SPL 2020.04-tbot-00375-g946d9a0974 > (Apr 17 2020 - 16:20:27 > +0200) installed > │ ├─found U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 > 2020 - 16:20:27 +0200) > installed > │ ├─POWEROFF (wandboard) > │ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -f 3 > │ │ ## Accessing Gembird #0 USB device 021 > │ │ ## Switched outlet 3 off > │ └─Done. (14.212s) > ├───────────────────────────────────────── > ├─Log written to > '/home/hs/data/Entwicklung/wandboard/tbot-tbot2go/log/lab1-wandboard-0040.json' > └─SUCCESS (14.340s) > hs@lab-1:tbot-tbot2go [wandboard-devel-messe] $ > -- > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: [email protected] > -- Derek Atkins 617-623-3745 [email protected] www.ihtfp.com Computer and Internet Security Consultant
