[PATCH 02/11] net: dc2114x: Clean up dc21x4x_send()

[Marek Vasut]

Clean up the driver send code to bring it up to standards with
U-Boot coding style, invert the loops where applicable to cut
down the level of indent. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
---
 drivers/net/dc2114x.c | 42 ++++++++++++++++++++----------------------
 1 file changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index d302d0362a..11ebea9c1a 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -304,47 +304,45 @@ static int dc21x4x_init(struct eth_device *dev, bd_t *bis)
 
 static int dc21x4x_send(struct eth_device *dev, void *packet, int length)
 {
-       int             status = -1;
-       int             i;
+       int status = -1;
+       int i;
 
        if (length <= 0) {
                printf("%s: bad packet size: %d\n", dev->name, length);
-               goto Done;
+               goto done;
        }
 
-       for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
-               if (i >= TOUT_LOOP) {
-                       printf("%s: tx error buffer not ready\n", dev->name);
-                       goto Done;
-               }
+       for (i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+               if (i < TOUT_LOOP)
+                       continue;
+
+               printf("%s: tx error buffer not ready\n", dev->name);
+               goto done;
        }
 
-       tx_ring[tx_new].buf    = cpu_to_le32(phys_to_bus((u32) packet));
-       tx_ring[tx_new].des1   = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
+       tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32)packet));
+       tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
        tx_ring[tx_new].status = cpu_to_le32(T_OWN);
 
        OUTL(dev, POLL_DEMAND, DE4X5_TPD);
 
-       for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
-               if (i >= TOUT_LOOP) {
-                       printf(".%s: tx buffer not ready\n", dev->name);
-                       goto Done;
-               }
+       for (i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) {
+               if (i < TOUT_LOOP)
+                       continue;
+
+               printf(".%s: tx buffer not ready\n", dev->name);
+               goto done;
        }
 
        if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) {
-#if 0 /* test-only */
-               printf("TX error status = 0x%08X\n",
-                       le32_to_cpu(tx_ring[tx_new].status));
-#endif
                tx_ring[tx_new].status = 0x0;
-               goto Done;
+               goto done;
        }
 
        status = length;
 
- Done:
-    tx_new = (tx_new+1) % NUM_TX_DESC;
+done:
+       tx_new = (tx_new + 1) % NUM_TX_DESC;
        return status;
 }
 
-- 
2.25.1