> The detection of the revD1 version is based on the presence of the PMIC. > Currently revb1 device trees are used for mx6q/mx6dl variants, which > do not have the PMIC nodes. > This causes revD1 boards to be incorrectly be detected as revB1. > Fix this issue by using the revd1 device trees, so that the PMIC node can be > found and then the PMIC can be detected by reading its register ID. > Imported the revd1 device trees from mainline kernel version 5.7-rc1. > Reported-by: Heiko Schocher <[email protected]> > Reported-by: Derek Atkins <[email protected]> > Signed-off-by: Fabio Estevam <[email protected]> > Tested-by: Derek Atkins <[email protected]> > Tested-by: Heiko Schocher <[email protected]> > Tested-by: Peter Robinson <[email protected]> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
