>-----Original Message-----
>From: U-Boot <[email protected]> On Behalf Of Biwen Li
>Sent: Friday, April 17, 2020 3:57 PM
>To: Jagdish Gediya <[email protected]>; Priyanka Jain
><[email protected]>; [email protected]; [email protected];
>[email protected]; Alison Wang <[email protected]>;
>[email protected]; Pramod Kumar <[email protected]>;
>Rajesh Bhagat <[email protected]>; Ruchika Gupta
><[email protected]>; [email protected]
>Cc: Xiaobo Xie <[email protected]>; Jiafei Pan <[email protected]>; u-
>[email protected]; Z.q. Hou <[email protected]>; Biwen Li
><[email protected]>
>Subject: [v2 04/27] dm: powerpc: P5040DS: add i2c DM support
>
>From: Biwen Li <[email protected]>
>
>This supports i2c DM for board P5040DS
>
>Signed-off-by: Biwen Li <[email protected]>
>---
> arch/powerpc/dts/p5040.dtsi | 5 ++++-
> include/configs/corenet_ds.h | 8 +++++++-
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
>diff --git a/arch/powerpc/dts/p5040.dtsi b/arch/powerpc/dts/p5040.dtsi
>index 67a62a7725..45988574a2 100644
>--- a/arch/powerpc/dts/p5040.dtsi
>+++ b/arch/powerpc/dts/p5040.dtsi
>@@ -3,7 +3,7 @@
> * P5040 Silicon/SoC Device Tree Source (pre include)
> *
> * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>- * Copyright 2019 NXP
>+ * Copyright 2019-2020 NXP
> */
>
> /dts-v1/;
>@@ -85,6 +85,9 @@
> reg = <0x114000 0x1000>;
> clock-frequency = <0>;
> };
>+
>+ /include/ "qoriq-i2c-0.dtsi"
>+ /include/ "qoriq-i2c-1.dtsi"
> };
>
> pcie@ffe200000 {
>diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index
>bafedcb0d2..d8402e493d 100644
>--- a/include/configs/corenet_ds.h
>+++ b/include/configs/corenet_ds.h
>@@ -1,6 +1,7 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> * Copyright 2009-2012 Freescale Semiconductor, Inc.
>+ * Copyright 2020 NXP
> */
>
> /*
>@@ -276,14 +277,19 @@
> #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
>
> /* I2C */
>+#ifndef CONFIG_DM_I2C
> #define CONFIG_SYS_I2C
>-#define CONFIG_SYS_I2C_FSL
> #define CONFIG_SYS_FSL_I2C_SPEED 400000
> #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
> #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
> #define CONFIG_SYS_FSL_I2C2_SPEED 400000
> #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
> #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
>+#else
>+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
>+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
>+#endif
>+#define CONFIG_SYS_I2C_FSL
>
> /*
> * RapidIO
>--
>2.17.1
Reviewed-by: Priyanka Jain <[email protected]>
